PCB-(M)641B60
zoom_out_map

PCB-(M)641B60

  • Vibration transmitter with power output according to
    the RMS value of vibration speed,
  • measuring range 0 … 12.7 mm / s RMS,
  • output range 4 … 20 mA,
  • frequency range 10 … 1,000 Hz,
  • integrated Armored cable, length 3 m,
    ending on cut end
  • ""
    basic data
    range 0,0 … 0.5 in / s RMS 0.0 … 12.7 mm / s RMS [1]"
    Output area 4 … 20 mA
    frequency range (± 10%) 600 … 60,000 cpm 10 … 1,000 Hz [2] [3]
    Wide band resolution 0.005 in / s RMS 0.13 mm / s pk [4]
    Linearity error ≤1%
    conditions of use
    temperature range -40 … 185 ° F -40 … 85 ° C
    technical Properties
    power 12 … 30 V DC
    settling time (area within ±2% of full scale) <15 s
    electrical insulation (housing) > 100,000,000 Ω
    physical properties
    size -. Allen 1.0 in 25.4 mm
    size - height 4.2 in 107 mm
    dimensions (without cable) 4.7 oz 131 grams
    Mounting thread 1/4 "-28 UNFNo metric equivalent
    Assembly torque 3 … 5 ft-lb 4 … 7 Nm
    sensor element ceramic
    geometry the sensor element shear principle
    housing material stainless steel
    sealing hermetically sealed welded
    Electrical connection integrated armoured cable
    cable outlet top
    Terminal assigNment (red wire) output signal 4 … 20 mA positive
    pin assigNment (blue wire) output signal 4 … 20mA negative
    Cable length 10 ft 3.0 m
    cable type polyurethane [5]
    notes
    [1] conversion factor 1 in / sec = 0.0254 m/sec.
    [2] at frequencies below 5 Hz, the output signal fluctuates.
    [3] 1 Hz 60 = cpm ("Cycles Per Minute": rpm).
    [4] typically
    [5] two-core cable with stainless steel reinforcement
    [6] Details: see PCBs Declaration of conformance PS039
    Equipment
    081A40 mounting bolts with 1/4 "-28 thread -1
    ICS-4 frequency response for uniaxial" Cpm sensors from 0 (0 Hz) up to the upper 10% frequency of vibration transmitter -1
    (RV) raw signal output≥ 100 MΩ/g (±20%)
    electrical connection integrated armoured cable
    Connections (red wire) output signal 4 … 20 mA positive
    (black wire) pin assigNment output signal 4 … 20 mA negative
    Pin assigNment (white wire) raw signal positive
    Pin assigNment (green wire) raw signal negative
    (M) metric mounting
    equipment
    M081A61 metric mounting bolts with M6 thread -1
    PCB-(M)641B60

    Specific References

    Download

    641B60_drawing.PDF

    Technical drawing

    Download (41.73k)

    641B60_manual.PDF

    Operating instructions

    Download (804.96k)

    641B60_specs.PDF

    Technical data sheet

    Download (150.49k)