PCB-(M)607A11/030BZ
    zoom_out_map

      PCB-(M)607A11/030BZ

    • Industrial ICP® vibration sensor,
    • Measurement range 50 g,
    • Sensitivity 100 mV/g,
    • Frequency range 0.5 … 10,000 Hz,
    • One-point calibration at 100 Hz,
    • Free ausrichtbares integrated cable, length 9 metres, ending
      on cut end
    • "
      basic data
      sensitivity (±15%)100 mV/g10.2 mV/(m/s²)[7]
      measuring range±50 g±490 m / s²
      Frequency range (± 3 dB)30 … 600,000 cpm0.5 … 10,000 Hz
      resonance frequency1,500 kcpm25,000 Hz[1]
      Wide band resolution350 µg3.434 µm / s ²[1]
      linearity≤1%[6]
      Lateral acceleration sensitivity≤ 7%
      Conditions of use
      Overload limit (shock)5,000 g pk49,050 m/s² pk
      Temperature range-65 … 250 ° F-54 … 121 ° C
      protection classIP68
      technical characteristics
      Settling time (on bias voltage ± 1%)≤ 2 s
      discharging charging time constant≥ 0.3 sMounting torque (mounting bolts)7 … 8 ft-lb9.5 … 10.8 Nm[2] [3]
      Assembly torque (hex nut)2 … 5 ft-lb2.7 … 6.8 Nm
      sensor elementceramic
      Geometry of the sensor elementshear principle
      housing materialstainless steel
      sealinghermetically sealed welded
      electrical connectionpotted integrated cable
      cable exitside
      Cable length30 ft9.14 m
      cable typepolyurethane[5]
      notes
      [1]typically
      [2]Assembly requires Allen key 1/8 "(for inch mounting bolts) or 3 mm (for metric mounting bolts).
      [3]of the mounting bolts must be tightened with a higher torque than the hex nut, so that the sensor problemlos can be demounted again.
      [4]with mounting bolt
      [5]Screened two-wire cable with twisted wire
      [6]zero-based balancing line, determined using the method of least squares
      [7]conversion factor 1 g = 9.81 m/s²
      [8]details: see PCBs Declaration of conformance PS023 and < a href = ""... "/ produkte_skript/downloads/ce/ps060.pdf" "class ="blue"> PS060
      equipment
      080A156mounting bolts 1/2"-20 1/4"28-1
      ICS-2single point calibration at 100 Hz (traceable to NIST)-1
      (M) metric mounting
      equipment
      M080A159Amounting bolts 1/2 "20 M6 x 1-1
      (TO) temperature output
      temperature range36 … 250 ° F2 … 121 ° C"
      Transcription factor5.56 mV / ° F
      (zero point at 32 °F)
      10 mV / ° C
      Electrical connectionpotted integrated cable
      connections (red wire)acceleration output
      (Black wire) pin assigNmentmass
      pin assigNment (white wire)temperature output
      (EX) with ATEX approved
      approval for use in potentially explosive atmospheresExIA IIC T4, AExia IIC, T4
      approval for use in potentially explosive atmospheresEEx nL IIC T4,-40 ° C ≤ Ta ≤ 121 ° C, II 1 G
      approval for use in potentially explosive atmospheresCL I, div I, groups A, B, C, D CL
      II, div I, groups E, F, G Cl
      III, div I
      Approval for use in potentially explosive atmospheresCL I, div 2, groups A, B, C, D
      ExnL IIC T4, AExnA IIC T4
      approval for potentially explosive atmospheresEEx nL IIC T4,-40 ° C ≤ Ta ≤ 121 ° C, II 3 G
      PCB-(M)607A11/030BZ

      Specific References

      Download

      607A11_030BZ_manual.PDF

      Operating instructions

      Download (1.76M)