PCB-200C20
| basic data | |||
| sensitivity (±15%) | /0.25 mV / lb | 56.2 mV / kN | |
| measuring range (pressure) | 20,000 lb | 88,96 kN | |
| Maximum permissible static load (force) | 30,000 lb | 133,44 kN | |
| wide band resolution | 0.30 lb RMS | 1.3 N RMS | [2] |
| lower limiting frequency (-5%) | 0.0003 Hz | [3] | |
| upper frequency limit | 40,000 Hz | [5] | |
| linearity | ≤ 1% FS | [4] | |
| conditions | |||
| temperature range | -65 … 250 ° F | -54 … 121 ° C | |
| Temperature coefficient of sensitivity | ≤ 0.08 %/°F | ≤ 0,1≤4 %/°C | |
| technical | |||
| Discharge charge time constant (at room temperature) | ≥ 2,000 s | ||
| supply | 20 … 30 V DC | [1] | |
| Constant power supply | 2… 20 mA | ||
| output impedance | ≤ 100 Ω | ||
| Bias voltage | 8 … 14 V DC | ||
| Spectral noise (1 Hz) | 0.039 lb / √ Hz | 0.17 N / √ Hz | [2] |
| spectral noise (10 Hz) | 0.012 lb / √ Hz | 0,054 N / √ Hz | [2] |
| Spectral noise (100 Hz) | 0.0034 lb / √ Hz | 0.015 N / √ Hz | [2] |
| spectral noise (1,000 Hz) | 0,00088 lb / √ Hz | 0.0039 N / √ Hz | [2] |
| (Pressure) output polarity | positive | ||
| physical properties | |||
| rigidity | 63 lb/µin | 11 kN/µm | [2] |
| Size - diameter | 1.5 in | 38.1 mm | |
| size - height | 0.5 in | 12.7 mm | |
| mass | 3.1 oz | 88 grams | |
| Housing material | stainless steel | ||
| sealing | hermetic | ||
| Electrical connection | 10-32-coaxial socket | ||
| connection position | side | ||
| Mounting thread | 1/4 "-28 threaded | no equivalent | |
| notes | |||
| [1] | for the use of the full range, the supply voltage must be at least 25 V" DC is. | ||
| [2] | typically | ||
| [3] | calculated on the basis of discharging charging time constant | ||
| [4] | zero-based balancing line, determined using the method of least squares | ||
| [5] | suppose value determined on the basis of solid state Dynamics calculations | ||
| [6] | details: see PCBs Declaration of conformance PS023 | ||
| equipment | |||
| 080A81 | adhesive for thread lock | -1 | |
| 081A06 | mounting bolts, 1/4 "28 to 1/4"-28 x 0.37 in long, BeCu, without shoulder | -1 | |
| 081 B 20 | mounting bolts, with shoulder(1/4 "28 1/4"-28) | -1 | |
| 084 B 23 | premium cap, convex (for model 200 20) | -1 | |
| M081A61 | mounting bolts 1/4 "28 M6 x 1 | -1 | |
| (N) negative output polarity | |||
| (W) waterproof cable connection | |||
| electrical connection | sealed cable connection | ||
| Cable exit | side |
PCB-200C20
