PCB-200B05
| basic data | |||
| sensitivity (±15%) | 1 mV / lb | 224,82 mV / kN | |
| measuring range (pressure) | 5,000 lb | 22.24 kN | |
| Maximum permissible static load (force) | 8,000 lb | 35,59 kN | |
| wide band resolution | 0.10 lb RMS | 0,4448 N RMS | [1] |
| Lower limiting frequency (-5%) | 0.0003 Hz | [3] | |
| upper frequency limit | 75,000 Hz | [4] | |
| linearity error | ≤ 1% FS | [2] | |
| conditions | |||
| temperature range | -65 … 250 ° F | -54 … 121 ° C | |
| temperature coefficient Temperature coefficient of sensitivity | ≤ 0.03 %/°F | ≤ 0,054 %/°C | |
| technical properties | |||
| discharge charge time constant (at room temperature) | ≥ 2,000 s | ||
| Supply | 20 … 30 V DC | ||
| constant power supply | 2 … 20 mA | ||
| output impedance | ≤ 100 Ω | ||
| Bias voltage | 8 … 14 V DC | ||
| (Pressure) output polarity | positive | ||
| physical properties | |||
| stiffness | 11 lb/µin | 1.9 kN/µm | [1] |
| size - diameter | 0,650 in | 16.51 mm | |
| size - height | 0.360 in | 9.14 mm | |
| Size - diameter of the measuring surface | 0.500 in | 12.7 mm | |
| mass | 0.5 oz | 14 grams | |
| parts usematerial | stainless steel | ||
| sealing | hermetically sealed | ||
| electrical connection | 10-32-coaxial socket | ||
| Connection position | side | ||
| mounting thread | 10-32 female thread | ||
| notes | |||
| [1] | Typically | ||
| [2] | zero-based balancing line, determined using the method of least squares | ||
| [3] | calculated on the basis of discharging charging time constant | ||
| [4] | suppose value determined on the basis of solid state Dynamics calculations | ||
| [5] | details: see PCBs Declaration of Conformance PS023 | ||
| equipment | |||
| 080A81 | adhesive for thread lock | -1 | |
| 081 B 05 | Mounting bolts (10-32 on 10-32) | -1 | |
| 084A83 | impact plate | -1 | |
| M081A62 | mounting bolts, 10-32 to M6 x 1, BeCu, with shoulder | -1 | |
| (S) negative output polarity | |||
| (W) waterproof cable | |||
| wiring | sealed Cable | ||
| cable exit | side |
PCB-200B05
