PCB-HT352B01
| basic data | |||
| sensitivity (±20%) | 1.0 mV / g | 0.10 mV/(m/s²) | |
| range | ±5. 000 g PK | ±49. 050 m/s² pk | |
| frequency range (±5%) | 2 … 10,000 Hz | ||
| Frequency range (± 10%) | 1 … 20,000 Hz | ||
| resonance frequency | ≥ 65,000 Hz | ||
| wide band resolution | 0.02 g RMS | 0.2 m/s² RMS | [2] |
| Linearity | ≤ 1% | [1] | |
| transverse acceleration sensitivity | ≤ 5% | ||
| conditions of use | |||
| (Shock) overload limit | ± 10.000 g pk | ±98.100 m/s² pk | |
| Temperature range (operation) | -65 … 325 ° F | -54 … 163 ° C | [3] |
| Technical properties | |||
| Supply voltage | 18 … 30 V DC | ||
| Constant power supply | 2 … 20 mA | ||
| output impedance | ≤200Ω | ||
| Bias voltage | 7 … 11 V DC | ||
| discharging charging time constant | 0.3 … 1,0 s | ||
| physical properties | |||
| Size - diameter | 0.24 in | 6.1 mm | |
| Size - height | 0.32 in | 8.1 mm | |
| dimensions (without cable) | 0.03 oz | 0.7 grams | [2] |
| sensor element | Ceramic | ||
| Geometry of the sensor element | shear principle | ||
| housing material | titanium | ||
| Sealing | hermetically sealed welded | ||
| electrical connector | pins soldered cable | ||
| cable outlet | Top | ||
| cable length | 10 ft | 3 m | |
| cord type | type 030, coaxial cable | ||
| Fixing | Adhesive mounting | ||
| Notes | |||
| [1] | zero-based balancing line, determined using the method of least squares | ||
| [2] | typically | ||
| Equipment | |||
| 080A109 | mounting wax | -1 | |
| 080A90 | cyano | -1 | |
| ACS-1 | frequency response, traceable to NIST (10 Hz up to the upper 5% point) | -1 |
PCB-HT352B01
