PCB-(M)320C53
- ICP® high-temperature vibration sensor,
- Continuous use temperature up to 163 ° C,
- Measuring range 5,000 g,
- Sensitivity 1 mV / g,
- Frequency range 1... 5,000 Hz,
- Mass 1.9 grams,
- 5-44 connector on the side
| specifications | |||
|---|---|---|---|
| basic data | English units | SI units | |
| Sensitivity (± 20%) | 1 mV / g | 0.102 mV / (m / s) | |
| measuring range | ± 5,000 g pk | ± 49 050 m / s pk | |
| Frequency range (± 5%) | 1 ... 5000 Hz | ||
| Frequency range (± 10%) | 0.6 ... 10,000 Hz | [4] | |
| Frequency range (± 3 dB) | 0.3 ... 20,000 Hz | [4] | |
| integrated filter | First order low pass | ||
| Corner frequency of the electric filter | ≥20.000 Hz | ||
| resonant frequency | ≥50.000 Hz | ||
| Broadband resolution (1 ... 10,000 Hz) | 0.04 g RMS | 0.39 m / s RMS | [3] |
| linearity error | ≤1% | [1] | |
| Lateral acceleration sensitivity | ≤5% | [2] | |
| Operating conditions | |||
| Overload limit (shock) | ± 10,000 g pk | ± 98,100 m / s² pk | |
| The temperature range (operation) | -100 ... 325 ° F | -73 ... 163 ° C | |
| Temperature coefficient of sensitivity | ≤0,005% / ° F | ≤0,009% / ° C | |
| Strain sensitivity (base surface) | ≤0,2 g / µε | ≤2 (m / s²) / µε | [3] |
| Technical characteristics | |||
| supply voltage | 19 ... 30 V DC | ||
| Constant current supply | 2 ... 20 mA | ||
| output impedance | ≤200 Ω | ||
| Bias voltage | 8 ... 12 V DC | ||
| discharging | 0.4 ... 2.2 s | ||
| Settling time (on the bias voltage ± 10%) | ≤10 s | ||
| Spectral Noise (1 Hz) | 7,500 µg/√Hz | 73,500 (µm/s²)/√Hz | [3] |
| Spectral noise (10 Hz) | 1500 mcg / µε | 14,700 (µm/s²)/√Hz | [3] |
| Spectral noise (100 Hz) | 500 µg/√Hz | 4,905 (µm/s²)/√Hz | [3] |
| Spectral noise (1,000 Hz) | 250 ug / √Hz | 2,450 (µm/s²)/√Hz | [3] |
| Electrical insulation (base) | ≥100MΩ | [5] [4] | |
| physical properties | |||
| Size - Height | 0.23 in | 5.84 mm | |
| Dimensions | 0.065 oz | 1.85 grams | [3] |
| sensor element | UHT-12 ™ | ||
| Geometry of the sensor element | shear principle | ||
| housing material | titanium | ||
| seal | hermetically sealed | ||
| Size - Length | 0.65 in | 16.4 mm | |
| Size - Width | 0.38 in | 9.6 mm | |
| electrical connection | 5-44-coaxial | ||
| port location | Laterally | ||
| attachment | Through Hole | ||
| Hints | |||
|---|---|---|---|
| [1] | Zero-based line of best fit, determined by the method of least squares | ||
| [2] | Lateral acceleration sensitivity typically ≤3% | ||
| [3] | typically, | ||
| [4] | and 3 dB range typically around 2,000 Hz - When using the insulating washer, the upper frequency limit of the 10% reduced. | ||
| [5] | When using the insulating washer | ||
| [6] | Details: see PCB Declaration of Conformance PS023 | ||
| included supply | ||
|---|---|---|
| 039A20 | Allen wrench, 5/64 "hex | (1) |
| 081B36 | Isolated mounting screw, 2-56 thread x 3/8 "long (for the model 357B06) | (1) |
| ACS-1 | Frequency response, traceable to NIST (10 Hz up to the top 5% point) | (1) |
| available options | ||||
|---|---|---|---|---|
| (M) Metric assembly | ||||
| included supply | ||||
| M039A20 | Allen wrench, 1.5mm hex | (1) | ||
| M081B36 | Metric mounting screw | (1) | ||
PCB-(M)320C53
