PCB-8159-0012A
PCB L&T 5-digit red LED display, 1/8 DIN panel mount strain gage signal conditioner, 10 VDC excitation, 2.5 mV/V full scale, 4 set points, 10 VDC & 4 to 20 mA outputs, CE
controller. Provides 5 or 10 VDC excitation and delivers +/- 10 V and 4 to 20 mA output signals. 5-digit red LED display with 1/8 DIN panel mounting. 4 programmable set points with LED status indicators. Optional RS-232 output.Specification Notes
[1] At +104 °F (+40 °C)
[2] Default Value: Internally selectable between 5 VDC and 10 VDC @120 mA max with remote sense short circuit current limiting.
[3] Default Value: Internally selectable between 1.5 mV/V, 2.5 mV/V, and 3.5 mV/V.
[4] Upper frequency limited by single pole, low-pass filter.
[5] Unit set to 230 VAC when ordered as "F8159-0012A", internally selectable
[6] 1/8 DIN size.
[7] See PCB Declaration of Conformance PS113 for details.
English: | SI: | ||
---|---|---|---|
Performance | |||
Linearity | ±0.015 % FS | ±0.015 % FS | |
Environmental | |||
Temperature Range | +14 to +122 °F | -10 to +50 °C | |
Temperature Stability | ±0.56 µV/°F | ±1 µV/°C | |
Maximum Humidity | 90 % | 90 % | [1] |
Electrical | |||
Excitation Voltage (±0.5 %) | 10 VDC | 10 VDC | [2] |
Full Scale Input | 2.5 mV/V | 2.5 mV/V | [3] |
Output Voltage (Analog Signal) | ±10 VDC | ±10 VDC | |
Output Current (Analog Signal) | 4 to 20 mA | 4 to 20 mA | |
Output Bandwidth | 0 to 1000 Hz | 0 to 1000 Hz | [4] |
Digital Resolution | 1 part in 19,999 | 1 part in 19,999 | |
Common Mode Rejection | >120 @50-60 Hz | >120 @50-60 Hz | |
Display Type | 0.4in. (10.2mm) LED | 0.4in. (10.2mm) LED | |
Display Range | ± 99,999 (5 digits) | ± 99,999 (5 digits) | |
Decimal Point | Adjustable via front panel | Adjustable via front panel | |
Set Points, Open Collector | 2 High and 2 Low | 2 High and 2 Low | |
Shunt Calibration | Actuated via front panel | Actuated via front panel | |
Shunt Calibration Resistor | Accessible through rear panel | Accessible through rear panel | |
Power Required | 115/50 to 60 VAC/Hz | 115/50 to 60 VAC/Hz | [5] |
Input | Fully Differential (bi-polar) | Fully Differential (bi-polar) | |
Physical | |||
Electrical Connector (Sensor) | 9-Pin Female D-sub | 9-Pin Female D-sub | |
Electrical Connector (input/output) | 15-Pin Male D-sub | 15-Pin Male D-sub | |
Electrical Connector (AC Power Input) | IEC 320 | IEC 320 | |
Size - Height | 1.89 in | 48 mm | [6] |
Size - Width | 3.78 in | 96 mm | [6] |
Size - Diameter | 5.88 in | 149 mm | [6] |
Weight | 1.3 lb | 0.59 kg |
* All specifications are at room temperature unless otherwise specified.
Accessories
Supplied | ||
017 | 1 |