PCB-482B11
1-channel, line-powered, ICP® sensor signal cond., gain x1, x10, x100, BNC input/output conn.
- Channels: 1
- Voltage Gain: (±1%)x1 x10 x100
Specification Notes
[1] User adjustable, factory set at 4 mA (± 0.5 mA).
[2] Unit set to 230 VAC when ordered as model F482B11.
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Channels | 1 | 1 | |
| Voltage Gain (±1 %) | x1 x10 x100 | x1 x10 x100 | |
| High Frequency Response (-5 %) (Gain x1) | 85 kHz | 85 kHz | |
| High Frequency Response (-5 %) (Gain x10) | 85 kHz | 85 kHz | |
| High Frequency Response (-5 %) (Gain x100) | 60 kHz | 60 kHz | |
| Fault/Bias Monitor/Meter (meter) | 24 VDC FS | 24 VDC FS | |
| Environmental | |||
| Temperature Range | +30 to +130 °F | -1.1 to +54.4 °C | |
| Electrical | |||
| AC Power (50-400Hz) | 105 to 125 VAC | 105 to 125 VAC | [2] |
| AC Power | 0.25 Amps | 0.25 Amps | |
| Excitation Voltage (To Sensor) | +24 VDC | +24 VDC | |
| DC Offset (Maximum) | ±30 mV | ±30 mV | |
| Constant Current Excitation (To Sensor) | 2 to 20 mA | 2 to 20 mA | [1] |
| Discharge Time Constant | 3 sec | 3 sec | |
| Spectral Noise (1 Hz) | 4.3 µV/√Hz | -107 dB | |
| Spectral Noise (10 Hz) | 1.3 µV/√Hz | -118 dB | |
| Spectral Noise (100 Hz) | 0.37 µV/√Hz | -129 dB | |
| Spectral Noise (1 kHz) | 0.16 µV/√Hz | -136 dB | |
| Broadband Electrical Noise (1 to 10000 Hz) (Gain x1) | 29 µV | -91 dB | |
| Spectral Noise (10 kHz) | 0.12 µV/√Hz | -138 dB | |
| Spectral Noise (1 Hz) | 31 µV/√Hz | -90 dB | |
| Spectral Noise (10 Hz) | 13 µV/√Hz | -98 dB | |
| Spectral Noise (100 Hz) | 3.7 µV/√Hz | -109 dB | |
| Spectral Noise (1 kHz) | 1.8 µV/√Hz | -115 dB | |
| Spectral Noise (10 kHz) | 0.80 µV/√Hz | -122 dB | |
| Broadband Electrical Noise (1 to 10000 Hz) (Gain x10) | 198 µV | -74 dB | |
| Spectral Noise (1 Hz) | 274 µV/√Hz | -78 dB | |
| Spectral Noise (10 Hz) | 126 µV/√Hz | -88 dB | |
| Spectral Noise (100 Hz) | 39 µV/√Hz | -96 dB | |
| Spectral Noise (1 kHz) | 15 µV/√Hz | -104 dB | |
| Spectral Noise (10 kHz) | 6.6 µV/√Hz | -113 dB | |
| Broadband Electrical Noise (1 to 10000 Hz) (Gain x100) | 2.2 mV | -71 dB | |
| Physical | |||
| Electrical Connector (Input, sensor) | BNC Jack | BNC Jack | |
| Electrical Connector (Output) | BNC Jack | BNC Jack | |
| Size - Height | 4.3 in | 109.2 mm | |
| Size - Width | 1.8 in | 45.7 mm | |
| Size - Depth | 6.0 in | 152.4 mm | |
| Weight | 2 lb | 907.2 gm | |
* All specifications are at room temperature unless otherwise specified.
Accessories
| Supplied | ||
| 017AXX | 1 | |
PCB-482B11
