PCB-2508-01A
PCB L&T Reaction Torque Transducer, 50 in-lb/4.2 ft-lb (5.6 N-m) rated capacity, 50% static overload protection, 2-in (50.8 mm) Steel Flange
- Measurement Range: 50 lbf-in (5.65 Nm)
- Sensitivity: 2 mV/V (2 mV/V)
- Mounting: Flange (#10-24 Bolts) (Flange (No Metric Equivalent))
- Size - Diameter: 2.0 in (50.8 mm)
- Size - Length: 3.0 in (76.2 mm)
- Torsional Stiffness: 2350 lbf-in/radian (265.5 N-m/radian)
Specification Notes
[1] Nominal.
[2] FS - Full Scale.
[3] Singularly applied, i.e. no other extraneous loads.
[4] Over compensated operating temperature range.
[5] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[6] See Drawing 32786 for Complete Dimensions
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Measurement Range (Full Scale Capacity) | 50 lbf-in | 5.65 Nm | |
| Sensitivity (output at rated capacity) | 2 mV/V | 2 mV/V | [1] [2] |
| Non-Linearity | ≤0.10 % FS | ≤0.10 % FS | [2] |
| Hysteresis | ≤0.10 % FS | ≤0.10 % FS | [2] |
| Non-Repeatability | ≤0.02 % FS | ≤0.02 % FS | [2] |
| Resonant Frequency | 380 Hz | 380 Hz | |
| Maximum Torque | 75 lbf-in | 8.47 Nm | |
| Environmental | |||
| Overload Limit (Axial Thrust) | 200 lbf | 890 N | [3] |
| Overload Limit (Overhung Moment) | 50 lbf-in | 5.65 Nm | [3] |
| Overload Limit (Shear) | 13 lbf | 57.8 N | [3] |
| Temperature Range (Operating) | -65 to +200 °F | -54 to +93 °C | |
| Temperature Range (Compensated) | +70 to +170 °F | +21 to +77 °C | |
| Temperature Effect on Output (Maximum) | ±0.002 %Reading/°F | ±0.0036 %Reading/°C | [4] |
| Temperature Effect on Zero Balance (Maximum) | ±0.002 %FS/°F | ±0.0036 %FS/°C | [2] [4] |
| Electrical | |||
| Bridge Resistance | 700 Ohm | 700 Ohm | |
| Excitation Voltage (Recommended) | 10 VDC | 10 VDC | [5] |
| Insulation Resistance | 5 GOhm | 5 GOhm | |
| Zero Balance | ≤1.0 %RO | ≤1.0 %RO | |
| Output Polarity | cw+ | cw+ | |
| Physical | |||
| Size - Diameter | 2.0 in | 50.8 mm | [6] |
| Size - Length | 3.0 in | 76.2 mm | [6] |
| Weight | 2.0 lb | 908 g | |
| Mounting | Flange (#10-24 Bolts) | Flange (No Metric Equivalent) | |
| Torsional Stiffness | 2350 lbf-in/radian | 265.5 N-m/radian | |
| Sensing Element | Strain Gage | Strain Gage | |
| Housing Material (Sensor) | Anodized Aluminum | Anodized Aluminum | |
| Electrical Connector | PT02E-10-6P | PT02E-10-6P | |
* All specifications are at room temperature unless otherwise specified.
Accessories
| Supplied | ||
| 181-012A | Mating conn., 6-socket (F) w/strain relief for sensors with PT conn. | 1 |
PCB-2508-01A
