PCB-137B32
Quartz, free-field, ICP® blast pressure pencil probe, front sensor is 250 psi, 20 mV/psi, rear sensor is a placebo, 4-pin connector
This 2-channel pencil probe features our highest resolution sensing element in the front location and a placebo gage in the rear location; perfect for close in measurements and detecting error sources at the same measurement point.- Measurement Range: 250 psi (1724 kPa)
- Sensitivity: (±15%)20 mV/psi (2.90 mV/kPa)
- Resonant Frequency: >=400 kHz
- Electrical Connector: 4-Pin
- Weight: 16.1 oz (456 gm)
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] For +10 volt output, minimum 26 VDC supply voltage required. Negative 10 volt output may be limited by output bias.
[4] Rear element - see drawing #65310 for details.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.
English: | SI: | ||
---|---|---|---|
Performance | |||
Measurement Range (for ±5V output) | 250 psi | 1724 kPa | |
Useful Overrange (for ± 10V output) | 500 psi | 3447 kPa | [3] |
Sensitivity (±15 %) | 20 mV/psi | 2.90 mV/kPa | |
Sensitivity | 0 mV/psi | 0 mV/kPa | [4] |
Maximum Pressure | 5 kpsi | 34474 kPa | |
Resolution | 0.7 mpsi | 0.005 kPa | [2] |
Resonant Frequency | ≥400 kHz | ≥400 kHz | |
Rise Time (Incident) | ≤6.5 µ sec | ≤6.5 µ sec | |
Non-Linearity | ≤1.0 % FS | ≤1.0 % FS | [1] |
Environmental | |||
Temperature Range (Operating) | -100 to +275 °F | -73 to +135 °C | |
Temperature Coefficient of Sensitivity | ≤0.05 %/°F | ≤0.090 %/°C | |
Electrical | |||
Discharge Time Constant (at room temp) | ≥0.2 sec | ≥0.2 sec | |
Excitation Voltage | 20 to 30 VDC | 20 to 30 VDC | |
Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
Output Impedance | ≤200 Ohm | ≤200 Ohm | |
Output Bias Voltage | 8 to 14 VDC | 8 to 14 VDC | |
Physical | |||
Sensing Geometry | Compression | Compression | |
Sensing Element | Quartz | Quartz | |
Housing Material | Aluminum | Aluminum | |
Diaphragm | Invar | Invar | |
Sealing | Epoxy | Epoxy | |
Electrical Connector | 4-Pin | 4-Pin | |
Weight | 16.1 oz | 456 gm | [2] |
* All specifications are at room temperature unless otherwise specified.
Accessories
Supplied | ||
PCS-6 | Calibration of Series 134, 137 & 138 | 2 |