PCB-137B24A
zoom_out_map

PCB-137B24A

  • ICP® pressure sensor,
  • For blast pressure measurements
  • Measuring range 1,700 kPa,
  • Sensitivity 2.9 mV / kPa,
  • 10-32 female connector
  • basic data
    measuring range (±5 V output range) 250 psi 1.724 kPa
    measuring range (output range ±10 V) 500 psi 3.447 kPa [3]
    sensitivity (±15%) 20 mV / psi 2.90 mV / kPa
    maximum pressure 5 kpsi 34.474 kPa
    Resolution 0.7 mpsi 0.005 kPa [1]
    Resonance frequency ≥ 400,000 Hz
    rise time (unwittingly pressure) ≤ 6.5 µs
    linearity error ≤ 1.0% FS [2]
    conditions
    temperature range (operation) -100 … 275 ° F -73 … 135 ° C
    Temperature coefficient of sensitivity ≤0,05 %/°F ≤ 0,090 %/°C
    Technical properties
    Discharge charge time constant (at room temperature) ≥ 0.2 s
    Supply 20 … 30 V DC
    Constant power supply 2 … 20 mA
    output impedance ≤200Ω
    Bias voltage 8 … 14 V DC
    Physical properties
    geometry of the sensor element compression principle
    sensor element quartz
    Housing material aluminum
    membrane INVAR
    waterproofing epoxy resin
    Electrical connection 10-32-coaxial socket
    dimensions 12.5 oz 354 grams [1]
    notes
    [1] typically
    [2] zero-based balancing line, determined using the method of least squares
    [3] for output range up to 10 V, the supply voltage must be at least 26 V DC. At low bias voltage of the sensor, no negative output range is usable up to-10 V.
    [4] details: see PCBs Declaration of conformance PS023
    equipment
    085A43 Konnektorschutz -1
    PC-6 calibration series 134, 137, and 138 -1
    PCB-137B24A

    Specific References

    Download

    137B24A_drawing.PDF

    Technical drawing

    Download (330.13k)

    137B24A_manual.PDF

    Operating instructions

    Download (963.34k)

    137B24A_specs.PDF

    Technical data sheet

    Download (28k)