PCB-208C03
| basic data | |||
| sensitivity (±15%) | 10 mV / lb | 2.248 mV / kN | |
| measuring range (pressure) | 500 lb | 2,224 kN | |
| Measuring range (traction) | 500 lb | 2,224 kN | |
| maximum permissible static load (force) | ,3,000 lb | 13.5 kN | |
| maximum static force (traction) | 500 lb | 2,224 kN | |
| wide band resolution | 0.005 lb RMS | 0.02 N RMS | [2] |
| Lower limiting frequency (-5%) | 0.0003 Hz | [3] | |
| upper limit frequency | 36,000 Hz | [4] | |
| linearity error | ≤ 1% FS | [1] | |
| conditions | |||
| temperature range | -65 … 250 ° F | -54 … 121 ° C | |
| temperature coefficient Temperature coefficient of sensitivity | ≤0,05 %/°F | ≤0.09 %/°C | |
| technical properties | |||
| discharge charge time constant (at room temperature) | ≥ 2,000 s | ||
| Supply | 20 … 30 V DC | ||
| constant power supply | 2 … 20 mA | ||
| Output impedance | ≤ 100 Ω | ||
| Bias voltage | 8 … 14 V DC | ||
| Spectral noise (1 Hz) | 0,000211 lb / √ Hz | 0,000942 N / √ Hz | [2] |
| spectral noise (10 Hz) | 0,000109 lb / √ Hz | 0.000488 N /. √ Hz | [2] |
| spectral noise (100 Hz) | 0,0000387 lb / √ Hz | 0,000173 N / √ Hz | [2] |
| spectral noise (1,000 Hz) | 0,00000863 lb /. √ Hz | 0,0000385 N / √ Hz | [2] |
| (pressure) output polarity | positive | ||
| physical properties | |||
| stiffness | 6 lb/µin | 1.05 kN/µm | [2] |
| size - hex | 0.625 in | 15.88 mm | |
| size - height | 0.625 in | 15.88 mm | |
| Size - diameter of the measuring surface | 0.500 in | 12.7 mm | |
| dimensions | 0.80 oz | 22.7 grams | |
| parts usematerial | stainless steel | ||
| sealing | hermetically sealed | ||
| electrical connection | 10-32-coaxial socket | ||
| Connection position | side | ||
| mounting thread | 10-32 female thread | ||
| Assembly torque ( recommended) | 16 … 20 in-lb | 181 … 226 NCM | |
| notes | |||
| [1] | zero-based balancing line, determined using the method of least squares | ||
| [2] | typically | ||
| [3] | calculated on the basis of discharging charging time constant | ||
| [4] | for example, value determined on the basis of solid state Dynamics calculations | ||
| [5] | details: see PCBs Declaration of conformance PS023 | ||
| Accessories | |||
| 080A81 | Adhesive for thread lock | -1 | |
| 081 B 05 | mounting bolts (10-32 on 10-32) | 2 | |
| 084A03 | Impact cap | -1 | |
| M081A62 | mounting bolts, 10-32 to M6 x 1, BeCu, with shoulder | 2 | |
| (S) negative output polarity | |||
| (W) waterproof cable connection | |||
| electrical connection | sealed cable connection | ||
| connection position | Side |
PCB-208C03
