PCB-(M)356A70
| basic data | |||
| sensitivity (±30%) | 2.7 pC/g | 0.28 pC/(m/s²) | |
| range | ±500 g pk | ±4. 905 m/s 2 pk | |
| frequency range (+ 5%) | 5,000 Hz | [3] | |
| Frequency range (+ 10%) | 7,000 Hz | [3] | |
| resonance frequency | ≥35,000 Hz | ||
| linearity | ≤1% | [2] | |
| Transverse acceleration sensitivity | ≤5% | ||
| conditions of use | |||
| Overload limit (shock) | ±5. 000 g PK | ±49. 000 m/s² pk | |
| Temperature | -95 … 490 ° F | 70 … 254 ° C | |
| technical | |||
| capacity | 240 pF | [1] | |
| Insulation resistance (at 70 ° F [21 ° C]) | > 1.000.000 MΩ | ||
| Insulation resistance (at 490 ° F [254 ° C]) | [1] | ||
| Output polarity | negative | ||
| physical properties | |||
| sensor element | ceramic | ||
| geometry the sensor element | shear principle | ||
| housing material | titanium | ||
| sealing | hermetic | ||
| Size - length | 0.73 in | 18.5 mm | |
| size - width | 0.90 in | 22.9 mm | |
| size ße - height | 0.40 in | 10.2 mm | |
| mass | 0.28 oz | 7.9 grams | [1] |
| electrical connection | 5-44 coaxial | ||
| Mounting | hole | ||
| Assembly torque | 10 … 20 in-lb | 113 … 225 NCM | |
| notes | |||
| [1] | typically | ||
| [2] | zero-based balancing line, determined with the method of the smallestSquares | ||
| [3] | the lower cut-off frequency depends on the used signal conditioning electronics. | ||
| Equipment | |||
| 039A23 | Allen wrench, 5/32 "hex | -1 | |
| 080A90 | Cyano | -1 | |
| 081A46 | mounting screw, 10-32 UNF, 0.56 "long | -1 | |
| ACS-1 T | Frequency response for Triaxial accelerometer, traceable to NIST, 10 Hz up to the upper 5% frequency | -1 | |
| (P) positive output voltage | |||
| (M) metric mounting | |||
| equipment | |||
| M039A23 | Allen key, 4 mm hex | -1 | |
| M081A46 | mounting screw, M5 X 0.80 X 14 mm | -1 |
PCB-(M)356A70
