PCB-(M)357B06
zoom_out_map

PCB-(M)357B06

  • Miniature vibration sensor with charge output,
  • Continuous use temperature up to 260 ° C,
  • With through hole,
  • Measuring range 500 g
  • Sensitivity 5 pC/g,
  • Upper frequency limit 10,000 Hz,
  • Mass 2.3 grams,
  • 5-44 female connector on the side
  •  

    basic data
    sensitivity (±20%) 5 pC/g 0.51 pC/(m/s²)  
     
    range ±500 g pk ±4. 905 m/s 2 pk  
     
    frequency range (+ 5%) 10,000 Hz   [2]
     
    Frequency range (+ 10%) 15,000 Hz   [2] [3]
     
    frequency range (+ 3 dB) 25,000 Hz   [2] [3]
     
    resonance frequency ≥50,000 Hz    
     
    Linearity ≤1%   [6]
     
    transverse acceleration sensitivity ≤5%   [5]
    Conditions of use
    Overload limit (shock) ±10. 000 g pk ±98.100 m/s² pk  
     
    Temperature range 65 … 500 ° F -54 … 260 ° C  
     
    strain sensitivity (base area) ≤0.05 g/µε ≤0.5 (m/s²)/µε [1]
    Technical properties
    capacity 700 pF   [1]
     
    Insulation resistance (at 21 ° C) > 100,000 MΩ    
     
    output polarity negative    
     
    Electrical insulation (base)   [4] [3]
    physical properties
    sensor element ceramic    
     
    geometry of the Sensor element shear principle    
     
    housing material titanium    
     
    sealing hermetically sealed welded    
     
    Size - height 0.23 in 5.8 mm  
     
    size - length 0.65 in 16.4 mm  
     
    Size - width 0.38 at 9.6-mm  
     
    Mass 0.08 oz 2.3 grams [1]
     
    electrical connection 5-44 coaxial    
     
    connection position on the side    
     
    Mounting hole    
    notes
    [1] typically    
     
    [2] Thelower cut-off frequency depends on the used signal conditioning electronics.    
     
    [3] when using the insulating washer, the upper cut-off frequency of 10% decreases- and 3dB range typically around 2,000 Hz.    
     
    [4] when using the insulating washer    
     
    [5] transverse acceleration sensitivity typically ≤ 3%    
     
    [6] zero-based balancing line, determined using the method of least squares    
    equipment
    039A20 Inbusschlü wrench, 5/64 "hex -1  
     
    081 B 36 insulated mounting screw, 2-56 thread x 3/8" long (for model 357 B 06) -1  
     
    ACS-1 Frequency response, traceable to NIST (10 Hz up to the upper 5% point) -1  
    (M) metric mounting
    equipment      
     
    M039A20 Allen wrench, 1 5 mm Allen -1  
     
    M081B36 metric mounting screw -1  
    (P) positive output voltage
           
    PCB-(M)357B06

    Specific References

    Download

    357B06_drawing.PDF

    Technical drawing

    Download (56.52k)

    357B06_manual.PDF

    Operating instructions

    Download (496.1k)

    357B06_specs.PDF

    Technical data sheet

    Download (81.51k)