PCB-(M)354C10
zoom_out_map

PCB-(M)354C10

  • Triaxial ICP® miniature vibration sensor,
  • With through hole,
  • Masseisoliert,
  • Measuring range 500 g
  • Sensitivity 10 mV / g,
  • Frequency range 2 … 8,000 Hz,
  • Mass 5 grams,
  • Integrated connection cable, length 1.5 m,
    ending on 4-pin female connector,
  • including extension cable, length 1.5 m,
    ending to three BNC
  •  

    basic data
    sensitivity (±15%) 10 mV / g 1.02 mV/(m/s²)  
     
    range ±500 g pk ±4. 905 m/s 2 pk  
     
    frequency range (±5%) 2 … 8,000 Hz    
     
    Resonance frequency ≥40,000 Hz    
     
    Wide band resolution 0.003 g RMS 0.03 m/s² RMS [2]
     
    Linearity error ≤1%   [3]
     
    transverse acceleration sensitivity ≤5%    
    conditions
    (shock) overload limit ± 10.000 g PK ±98.100 m/s² pk  
     
    Temperature range -65 … 250 ° F -54 … 121 ° C [1]
    specifications
    power supply 18 … 30 V DC    
     
    Constant power supply 2 … 20 mA    
     
    output impedance ≤200Ω    
     
    Bias voltage 7 … 11 V DC    
     
    Discharging charging time constant 0.3 … 1,0 s    
     
    settlingbr(auf Bias-Spannung ±10 %) < 3 s    
     
    Spectral noise (1 Hz) 1,000 µg / √Hz 9.810 (µm / s ²) / √Hz [2]
     
    spectral noise (10 Hz) 300 µg / √Hz 2.943 ( µm / s ²) / √ Hz [2]
     
    spectral noise (100 Hz) 80 µg / √Hz 785 (µm / s ²) / √Hz [2]
     
    spectral noise ( 1,000 Hz) 25 µg / √Hz 308 (µm / s ²) / √Hz [2]
     
    electrical insulation    
    physical properties
    Sensor element ceramic    
     
    geometry of the sensor element shear principle    
     
    Housing material titanium    
     
    sealing hermetically sealed    
     
    size - H öhe 0.30 in 7.6 mm  
     
    size - length 0.55 in 14.0 mm  
     
    size - width 0.55 in 14.0 mm  
     
    Dimensions (without cable) 0.18 oz 5.0 grams [2]
     
    wiring 1/4 "-28 4-pin    
     
    Cable outlet On the side    
     
    Cable length 5 ft 1.5 m  
     
    cord type type 034, 4-wire shielded cable    
     
    Fixing hole    
    notes
    [1] the data for temperatures above 121 ° C applies only for transducers with HT option.    
     
    [2] typically    
     
    [3] zero-based balancing line, determined using the method of least squares    
     
    [4] Details: see PCBs Declaration of conformance PS023    
    Accessories
    034 G 05 4-wire shielded cable, 1.5 m, 4-pin connector to three BNC -1  
     
    039A21 Allen wrench 3/32 "hex -1  
     
    081 B 93 insulated mounting screw, 5-40 thread x 12.7 mm long (for model 354 C 10) -1  
     
    ACS-1T frequency response for Triaxial accelerometer, traceable to NIST, 10 Hz up to the upper 5% frequency -1  
    (M) Metric mounting
    equipment      
     
    M039A22 Allen wrench for use with thread M3 -1  
     
    M081B93 metric mounting screw -1  
    (HT) high temperature electronics
    temperature range -65 … 325 ° F -54 … 163 ° C  
    PCB-(M)354C10

    Specific References

    Download

    354C10_drawing.PDF

    Technical drawing

    Download (89.92k)

    354C10_manual.PDF

    Operating instructions

    Download (1.74M)

    354C10_specs.PDF

    Technical data sheet

    Download (32.37k)