PCB-355M102
- ICP® high-temperature vibration sensor,
- Continuous use temperature up to 163 ° C,
- With through hole,
- With built-in low-pass filter,
- Masseisoliert,
- Measuring range 500 g
- Sensitivity 10 mV / g,
- Frequency range 1 … 7,000 Hz,
- Mounting with M4 screw,
- 10-32 female connector on the side
| basic data | |||
| Sensitivity (± 10%) | 10 mV / g | 1.02 mV / (m / s) | |
| measuring range | ± 500 g pk | ± 4.900 m / s² pk | |
| Frequency range (± 5%) | 1 ... 7000 Hz | ||
| Frequency range (± 10%) | 0.75 ... 10,000 Hz | ||
| Frequency range (± 3 dB) | 0.35 ... 17,000 Hz | ||
| integrated filter | First order low pass | ||
| Corner frequency of the electric filter | ?17.000 Hz | ||
| resonant frequency | ?35.000 Hz | ||
| Broadband resolution (1 ... 10,000 Hz) | 0.001 g RMS | 0.01 m / s RMS | [1] |
| linearity error | ≤1% | [3] | |
| Lateral acceleration sensitivity | ≤5% | [2] | |
| Operating conditions | |||
| Overload limit (shock) | ± 5,000 g pk | ± 49 050 m / s pk | |
| The temperature range (operation) | -65 ... 325 ° F | -54 ... 163 ° C | |
| Technical characteristics | |||
| supply voltage | 19 ... 30 V DC | ||
| Constant current supply | 2 ... 20 mA | ||
| output impedance | ≤100 Ω | ||
| Bias voltage | 8 ... 12 V DC | ||
| discharging | 0.5 ... 2.0 s | ||
| Settling time (on the bias voltage ± 10%) | ≤10 s | ||
| Spectral Noise (1 Hz) | 440 µg/√Hz | 4,320 (µm/s²)/√Hz | [1] |
| Spectral noise (10 Hz) | 135 µg/√Hz | 1,325 (µm/s²)/√Hz | [1] |
| Spectral noise (100 Hz) | 35 µg/√Hz | 345 (µm/s²)/√Hz | [1] |
| Spectral noise (1,000 Hz) | 10 µg/√Hz | 98 (µm/s²)/√Hz | [1] |
| Electrical insulation (base) | ≥100MΩ | ||
| physical properties | |||
| Size - Height | 0.40 in | 10.2 mm | |
| Size - Length | 0.70 in | 17.8 mm | |
| Size - Width | 0.63 in | 15.9 mm | |
| Dimensions | 0.29 oz | 8.2 grams | [1] |
| sensor element | quartz | ||
| Geometry of the sensor element | shear principle | ||
| housing material | titanium | ||
| seal | hermetically sealed | ||
| electrical connection | 10-32 coaxial | ||
| connection | Laterally | ||
| attachment | Through Hole | ||
| Hints | |||
| [1] | typically, | ||
| [2] | Lateral acceleration sensitivity typically ≤ 3% | ||
| [3] | Zero-based line of best fit, determined by the method of least squares | ||
| [4] | Details: see PCB Declaration of Conformance PS023 | ||
| included supply | |||
| 081M252 | Insulated M4 mounting screw (for the model 355M102) | -1 | |
| M039A22 | Allen key | -1 | |
| 080A109 | mounting wax | -1 | |
| ACS-1 | Frequency response, traceable to NIST (10 Hz up to the top 5% point) | -1 |
PCB-355M102
