PCB-(M)355B12

PCB-(M)355B12

  • ICP®-miniature vibration sensor,
  • With through hole,
  • Masseisoliert,
  • Measuring range 500 g
  • Sensitivity 10 mV / g,
  • Frequency range 1 … 10,000 Hz,
  • Mass 2.3 grams,
  • 5-44 female connector on the side
  • basic data
    sensitivity (±10%)10 mV / g1.02 mV/(m/s²)
    range±500 g pk ±4. 905 m/s 2 pk
    frequency range (±5%)1 … 10,000 Hz
    Frequency range (± 10%)0.6 … 15,000 Hz[1]
    frequency range (± 3 dB)0.3 … 25,000 Hz[1]
    Resonance frequency≥ 50,000 Hz
    wide band resolution0.0005 g RMS0.005 m/s² RMS[2]
    Linearity≤ 1%[5]
    transverse acceleration sensitivity≤ 5%[3]
    conditions of use
    Overload limit± 10.000 g pk ±98.100 m/s² pk
    Temperature range (operation)-65 … 250 ° F-54 … 121 ° C
    Strain sensitivity (base area)≤ 0.05 g/µε≤ 0.5 (m/s²)/µε[2]
    technical characteristics
    Supply voltage19 … 30 V DC
    constant power supply2 … 20 mA
    Output impedance≤ 100 Ω
    Bias voltage8 … 12 V DC
    discharging charging time constant0.5 … 2.0 s
    Settling time < br(auf Bias-Spannung ±10 %)≤<5 s
    spectral noise (1 Hz)190 µg / √ Hz1,860 (µm / s ²) / √ Hz[2]
    spectral noise (10 Hz)30 µg / √ Hz294 (µm / s ²) / √ Hz[2]
    spectral noise (100 Hz)12 µg /. √ Hz118 (µm / s ²) / √ Hz[2]
    spectralNoise (1,000 Hz)5 µg / √ Hz49 (µm / s ²) / √ Hz[2]
    electrical insulation (base) ≥100 MΩ[4] [1]
    -physical Properties
    size - height0.23 in5.84 mm
    size - length0.65 in16.4 mm
    Gr size - width0.38 at9.6-mm
    mass0.08 oz2.3 grams[2]
    sensor elementceramic
    Geometry of the sensor elementshear principle
    housing materialtitanium
    sealing Hermetically sealed welded
    electrical connection5-44 coaxial
    connection positionside
    Mountinghole
    notes
    [1]the upper cutoff frequency of 10% decreases when using insulating washer- and 3dB area typically around 2000 He.g.
    [2]typically
    [3]transverse acceleration sensitivity typically ≤ 3%
    [4]when using the insulating washer
    [5]zero-based balancing line, determined using the method of least squares
    [6]details: see PCBs Declaration of conformance PS023
    equipment
    039A20Allen wrench, 5/64 "hex-1
    081 B 36insulated mounting screw, 2-56 thread x 3/8 "long-1
    ACS-1frequency response, rückf ührbar on NIST (10 Hz up to the upper 5% point)-1
    (M) metric mounting
    equipment
    M039A20are Brussels, 1, 5mm hexagonal-1
    M081B36metric mounting screw-1

    6 other articles of the same category: