PCB-(M)320C52

PCB-(M)320C52

  • ICP® high-temperature vibration sensor,
  • Continuous use temperature up to 163 ° C,
  • Measuring range 500 g
  • Sensitivity 10 mV / g,
  • Frequency range 1 … 10,000 Hz,
  • Mass 1.9 grams,
  • 5-44 female connector on the side
  • basic data
    sensitivity (±10%)10 mV / g1.02 mV/(m/s²) 
     
    range±500 g pk ±4. 905 m/s 2 pk 
     
    frequency range (±5%)1 … 10,000 Hz  
     
    Frequency range (± 10%)0.6 … 15,000 Hz [1]
     
    frequency range (± 3 dB)0.3 … 25,000 Hz [1]
     
    Resonance frequency≥50,000 Hz  
     
    wide band resolution0.004 g RMS0.039 m/s² RMS[2]
     
    Linearity≤1% [5]
     
    transverse acceleration sensitivity≤5% [3]
    conditions of use
    Overload limit±5. 000 g pk±49. 000 m/s² pk 
     
    Temperature range (operation)-100 … 325 ° F-73 … 163 ° C 
     
    Temperature coefficient of sensitivity? 0.005 %/°F? 0.009 %/°C 
     
    Strain sensitivity (base area)?.02 g/µε?.196 (m/s²)/µε[2]
    technical characteristics
    Supply voltage19 … 30 V DC  
     
    constant power supply2 … 20 mA  
     
    Output impedance≤200Ω  
     
    Bias voltage8 … 12 V DC  
     
    discharging charging time constant0.4 … 2.2 s  
     
    Settling time < br(auf Bias-Spannung ±10 %)? 2  
     
    spectral noise (1 Hz)750 µg / √Hz7,350 (µm / s ²) / √Hz[2]
     
    spectral noise (10 Hz)150 µg / √Hz1.470 (µm / s ²) / √Hz[2]
     
    spectralNoise (100 Hz)50 µg / √Hz490 (µm / s ²) / √Hz[2]
     
    spectral noise (1,000 Hz)25 µg / √Hz245 (µm / s ²) / √Hz[2]
     
    Electrical insulation (base)≥100 MΩ [4] [1]
    physical properties
    size - height0.23 in5.84 mm 
     
    Size - length0.65 in16.4 mm 
     
    size - width0.38 at9.6-mm 
     
    Mass0.065 oz1.85 grams[2]
     
    geometry of the sensor elementshear principle  
     
    housing materialtitanium  
     
    Sealinghermetically sealed welded  
     
    electrical connection5-44 coaxial  
     
    Connecting positionside  
     
    mountinghole  
    notes
    [1]when using the insulating Decreases the upper washerCut-off frequency of 10%- and 3dB range typically around 2,000 Hz.  
     
    [2]typically  
     
    [3]transverse acceleration sensitivity typically ≤ 3%  
     
    [4]when using the insulating washer  
     
    [5]zero-based balancing line, determined using the method of least squares  
     
    [6]details: see PCBs Declaration of conformance PS023  
    equipment
    039A20Allen wrench, 5/64 "hex-1 
     
    081 B 36insulated mounting screw, 2-56 thread x 3/8 "long-1 
     
    ACS-1frequency response, rückf ührbar on NIST (10 Hz up to the upper 5% point)-1 
    (M) metric mounting
    equipment   
     
    M039A20are Brussels, 1, 5mm hexagonal-1 
     
    M081B36metric mounting screw-1 

    5 other articles of the same category: