PCB-(M)646B00
zoom_out_map

PCB-(M)646B00

  • Vibration transmitter with power output according to
    the RMS of vibration acceleration,
  • measuring range 0 … 10 g RMS,
  • output range 4 … 20 mA,
  • frequency range 3 … 1,000 Hz,
  • 2 Pin socket top
  • "
    basic data
    range 0,0 … 10 g RMS 0.0 … 98.1 m/s² RMS [3]"
    Output area 4 … 20 mA
    frequency range (± 10%) 180 … 60,000 cpm 3 … 1,000 Hz [1] [2]
    Wide band resolution 0.05 g RMS 0.49 m/s² RMS [4]
    Linearity error ≤1%
    conditions of use
    temperature range -40 … 185 ° F -40 … 85 ° C
    technical Properties
    power 12 … 30 V DC
    settling time (area within ±2% of full scale) <15 s
    electrical insulation (housing) ≥ 100 MΩ
    physical properties
    size - hex 1.0 in 25.4mm
    size - height 2.6 in 66 mm
    weight 4.7 oz 131 grams
    mounting thread 1/4 "-28 UNF No metric equivalent
    Assembly torque 3 … 5 ft-lb 4 … 7 Nm
    sensor element ceramics"
    Geometry of the sensor element shear principle
    housing material stainless steel
    Sealing hermetically sealed welded
    Electrical connection 2-pin connector (MIL-C-5015)
    connection position above
    pin assigNment (PIN A ) Output signal 4 … 20 mA positive
    pin assigNment (PIN B) output signal 4 … 20mA negative
    notes
    [1] Frequencies below 5 Hz, the output signal fluctuates.
    [2] 1 Hz 60 = cpm ("Cycles Per Minute": turns)BPM).
    [3] conversion factor 1 g = 9.81 m/s²
    [4] typically
    [5] Details: See PCBs Declaration of conformance PS039 and PS053
    Accessories
    081A40 mounting bolts with 1/4 "-28 thread -1
    ICS-4 frequency response cpm for uniaxial sensors from 0 (0 Hz) up to the upper 10%-" Frequency of vibration transmitter -1
    (EX) with ATEX approval
    approval for use in potentially explosive atmospheres DIV II, CL I, GRPS A-D, ExnL, AExnA, IIC T4
    Approval for use in potentially explosive atmospheres EEx ia IIC T4,-40 ° C ≤ Ta ≤ 80 ° C, II 1 G
    approval for explosionsgefä endangered atmospheres EEx nL IIC T4,-40 ° C ≤ Ta ≤ 80 ° C, II 3 G
    approval for use in potentially explosive atmospheres DIV I, CL I, II, III, GPRS A-G, ExIA, AExia, IIC T4
    (RV) raw signal output≥ 100 MΩ/g (±20%)
    electrical connection 3-Pin MIL-C-5015
    pin assigNment ( PIN A) output signal 4 … 20 mA positive
    pin assigNment (PIN B) output signal 4 … 20mA negative
    pin assigNment ( Pin C) raw signal positive
    (M) metric mounting
    equipment
    M081A61 metric mounting bolts with M6 threaded -1
    PCB-(M)646B00

    Specific References

    Download

    646B00_drawing.PDF

    Technical drawing

    Download (66.18k)

    646B00_manual.PDF

    Operating instructions

    Download (738.84k)

    646B00_specs.PDF

    Technical data sheet

    Download (55.48k)