PCB-(M)355B04
zoom_out_map

PCB-(M)355B04

  • ICP® vibration sensor,
  • With through hole,
  • Masseisoliert,
  • Measuring range 5 g,
  • Sensitivity 1,000 mV / g,
  • Frequency range 1 … 8,000 Hz,
  • 10-32 female connector on the side
  •  

    basic data
    sensitivity (±10%) 1,000 mV / g 101.9 mV/(m/s²)  
     
    range ± 5 g PK ±49 m/s² pk  
     
    frequency range (±5%) 1 … 8,000 Hz    
     
    Frequency range (± 10%) 0.6 … 12,000 Hz    
     
    frequency range (± 3 dB) 0.3 … 17,000 Hz    
     
    Resonance frequency ≥30,000 Hz    
     
    wide band resolution 0.0001 g RMS 0.001 m/s² RMS [3]
     
    Linearity ≤1%   [1]
     
    transverse acceleration sensitivity ≤5%   [2]
    conditions of use
    Overload limit ±5. 000 g pk ±49. 000 m/s² pk  
     
    Temperature range 65…200 °F -54 … 93 ° C  
     
    strain sensitivity (footprint) 0.05 g/µε 0.49 (m/s²)/µε [3]
    Technical characteristics
    power 18 … 30 V DC    
     
    constant power supply 2 … 4 mA    
     
    Output impedance ? 1,000 ?    
     
    Bias voltage 8 … 12 V DC    
     
    Discharging charging time constant 0.5 … 2.0 s    
     
    spectral noise (10 Hz) 4 µg / √Hz 39 (µm / s ²) /. ? Hz [3]
     
    spectral noise (100 Hz) 2 µg / √Hz 20 (µm / s ²) / √Hz [3]
     
    spectral noise (1,000 Hz) 0.5 µg / √Hz 4.9 (µm / s ²) / √Hz [3]
     
    electrical insulation (base)    
    physical properties
    Size - length 0.95 in 24.1 mm  
     
    size - width 0.63 in 16.0 mm  
     
    mass 0.4 oz 11.2 grams [3]
     
    Sensor element ceramic    
     
    geometry of the sensor element shear principle    
     
    housing material titanium    
     
    Sealing hermetically sealed    
     
    electrical connection 10-32-coaxial socket    
     
    Connecting position side    
     
    mounting hole    
    notes
    [1] zero-based balancing line,. determined with the method of least squares    
     
    [2] transverse acceleration sensitivity typically ≤ 3%    
     
    [3] Typically    
     
    [4] details: see PCBs Declaration of conformance PS023    
    equipment
    039A22 are üssel, 7/64 "Allen -1  
     
    080A109 mounting wax -1  
     
    081 B 45 insulated mounting screw, 6-32 thread x 5/8 "long (for the models 355 B-02 and 355 B 03 355 B 04) -1  
     
    ACS-1 frequency response, traceable to NIST (10 Hz up to the upper 5% point) -1  
    (M) metric mounting
    equipment      
     
    M081B45 metric mounting screw -1  
     
    M039A22 Allen wrench for use with thread M3 -1  
    (W) waterproof cable connection
    connection position side    
    PCB-(M)355B04

    Specific References

    Download

    355B04_drawing_1.PDF

    Technical drawing 1

    Download (50.9k)

    355B04_drawing_2.PDF

    Technical drawing 2

    Download (49.79k)

    355B04_manual.PDF

    Operating instructions

    Download (1.73M)

    355B04_specs.PDF

    Technical data sheet

    Download (80.9k)