PCB-(M)355B03
zoom_out_map

PCB-(M)355B03

  • ICP® vibration sensor,
  • With through hole,
  • Masseisoliert,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 1 … 10,000 Hz,
  • 10-32 female connector on the side
  •  

    basic data
    sensitivity (±10%) 10.19 mV/(m/s²)  
     
    range ±50 g pk ±490 m/s 2 pk  
     
    frequency range (±5%) 1 … 10,000 Hz    
     
    Frequency range (± 10%) 0.6 … 12,000 Hz    
     
    frequency range (± 3 dB) 0.3 … 17,000 Hz    
     
    Resonance frequency ≥35,000 Hz    
     
    wide band resolution 0.0001 g RMS 0,0009 m/s² RMS [3]
     
    Linearity ≤1%   [1]
     
    transverse acceleration sensitivity ≤5%   [2]
    conditions of use
    Overload limit ±5. 000 g pk ±49. 000 m/s² pk  
     
    Temperature range -65… 250 ° F -54 … 121 ° C  
     
    strain sensitivity (footprint) 0.05 g/µε 0.49 (m/s²)/µε [3]
    Technical characteristics
    power 18 … 30 V DC    
     
    constant power supply 2 … 20 mA    
     
    Output impedance ≤200Ω    
     
    Bias voltage 7 … 13 V DC    
     
    Discharging charging time constant 0.5 … 2 s    
     
    spectral noise (10 Hz) 6 µg / √Hz 59 (µm / s ²) / √Hz [3]
     
    spectral noise (100 Hz) 2 µg / √Hz 19 (µm / s ²) / √Hz [3]
     
    spectral noise (1,000 Hz) 1 µg /. ? Hz 10 (µm / s ²) / √Hz [3]
     
    electrical insulation (base)    
    physical properties
    size ße - length 0.95in 24.1 mm  
     
    size - width 0.63 in 16.0 mm  
     
    weight 0.35 oz 10 grams [3]
     
    Sensor element Ceramic    
     
    Geometry of the sensor element shear principle    
     
    housing material titanium    
     
    Sealing hermetically sealed    
     
    electrical connection 10-32-coaxial socket    
     
    connection position side    
     
    Mounting hole    
    notes
    [1] zero-based balancing line, determined using the method of least squares    
     
    [2] transverse acceleration sensitivity typically ≤ 3%    
     
    [3] typically    
     
    [4] Details: see PCBs Declaration of conformance PS023    
    Equipment
    039A22 Allen wrench, 7/64 "Allen -1  
     
    080A109 mounting wax -1  
     
    081 B 45 insulated mounting screw, 6-32 thread x 5/8 "long (for the models 355 B 02, 355 B 03 and 355 B 04) -1  
     
    ACS-1 frequency response, traceable to NIST (10 Hz up to the upper 5% point) -1  
    (A) Bonding
    equipment      
     
    080A90 glue -1  
    (M) metric mounting
    Accessories      
     
    M081B45 metric mounting screw -1  
     
    M039A22 Allen key for use with thread M3 -1  
    (W) waterproof cable connection
    connection position side    
    PCB-(M)355B03

    Specific References

    Download

    355B03_drawing_1.PDF

    Technical drawing 1

    Download (29.9k)

    355B03_drawing_2.PDF

    Technical drawing 2

    Download (49.79k)

    355B03_manual.PDF

    Operating instructions

    Download (1.71M)

    355B03_specs.PDF

    Technical data sheet

    Download (83.77k)