PCB-353B34
- ICP® vibration sensor,
- Measurement range 50 g,
- Sensitivity 100 mV/g,
- Frequency range 1... 4,000 Hz,
- 10-32 female connector above
| basic data | |||
| Sensitivity (± 5%) | 100 mV / g | 10.19 mV / (m / s) | [1] |
| measuring range | ± 50 g pk | ± 491 m / s pk | |
| Frequency range (± 5%) | 1 ... 4000 Hz | ||
| Frequency range (± 10%) | 0.7 ... 7000 Hz | ||
| Frequency range (± 3 dB) | 0.35 ... 12,000 Hz | ||
| resonant frequency | ≥22.000 Hz | ||
| Broadband resolution | 0.0005 g RMS | 0.005 m / s RMS | [4] |
| linearity error | ≤1% | [2] | |
| Lateral acceleration sensitivity | ≤5% | [3] | |
| Operating conditions | |||
| Overload limit (shock) | ± 10,000 g pk | ± 98,100 m / s² pk | |
| The temperature range (operation) | -65 ... 250 ° F | -54 ... 121 ° C | |
| Strain sensitivity (base surface) | 0.0002 g / µε | 0,002 (m / s²) / µε | [4] |
| Technical characteristics | |||
| supply voltage | 20 ... 30 V DC | ||
| Constant current supply | 2 ... 20 mA | ||
| output impedance | ≤100 Ω | ||
| Bias voltage | 7.5 ... 11.5 V DC | ||
| discharging | 0.5 ... 2.0 s | ||
| Settling time (on the bias voltage ± 10%) | <25 s | ||
| Spectral Noise (1 Hz) | 320 µg/√Hz | 3,139 (µm/s²)/√Hz | [4] |
| Spectral noise (10 Hz) | 70 µg/√Hz | 687 (µm/s²)/√Hz | [4] |
| Spectral noise (100 Hz) | 18 µg/√Hz | 177 (µm/s²)/√Hz | [4] |
| Spectral noise (1,000 Hz) | 6.4 µg/√Hz | 63 (µm/s²)/√Hz | [4] |
| physical properties | |||
| Size - Height | 1.26 in | 32.0 mm | |
| Size - Hexagon | 0.75 in | 19.1 mm | |
| Dimensions | 0.96 oz | 27 grams | [4] |
| sensor element | quartz | ||
| Geometry of the sensor element | shear principle | ||
| housing material | titanium | ||
| seal | Hermetically sealed | ||
| electrical connection | 10-32 coaxial | ||
| port location | Above | ||
| mounting thread | 10-32 female thread | ||
| Hints | |||
| [1] | Sensitivity tolerance for sensors with B or Q-Option: ± 10% | ||
| [2] | Zero-based line of best fit, determined by the method of least squares | ||
| [3] | Lateral acceleration sensitivity typically ≤ 3% | ||
| [4] | typically, | ||
| [5] | Details: see PCB Declaration of Conformance PS023 | ||
| included supply | |||
| 080A109 | mounting wax | -1 | |
| 080A12 | adhesive mounting | -1 | |
| 081B05 | Mounting bolts (10-32 to 10-32) | -1 | |
| ACS-1 | Frequency response, traceable to NIST (10 Hz up to the top 5% point) | -1 | |
| M081B05 | Mounting bolts 10-32 on M6 x 0.75 | -1 | |
| (Q) Increased discharge time | |||
| Frequency range (± 5%) | 0.1 ... 4,000 Hz | ||
| Frequency range (± 10%) | 0.07 ... 7000 Hz | ||
| discharging | ?10 s | ||
| settling | <120 s | ||
| included supply | |||
| ACS-4 | Low frequency calibration (phase and amplitude) of 0.5 ... 10 Hz | -1 | |
| (B) Reduced bias voltage | |||
| Bias voltage | 4.5 ... 7.5 V DC | ||
| supply voltage | 12 ... 30 V DC | ||
| Constant current supply | 1 ... 20 mA | ||
| measuring range | 30 g pk | 294 m / s pk | |
| (J) ground isolation | |||
| Frequency range (± 5%) | 1 ... 4000 Hz | ||
| Frequency range (± 10%) | 0.7 ... 6000 Hz | ||
| resonant frequency | 18,000 Hz | ||
| electrical insulation | ?100 milliohms | ||
| Size - Hexagon | 0.75 in | 19.1 mm | |
| Size - Height | 1.23 in | 31.2 mm | |
| (W) Waterproof cable connection | |||
| port location | Above |
PCB-353B34
