PCB-353B02
zoom_out_map

PCB-353B02

  • ICP® vibration sensor,
  • Range 250 g,
  • Sensitivity 20 mV / g,
  • Frequency range 1 … 7,000 Hz,
  • 10-32 female connector above
  • basic data
    sensitivity (±5%) 20 mV / g 2.04 mV/(m/s²) [2]
    range ±250 g PK ±2. 453 m/s² pk
    frequency range (±5%) 1 … 7,000 Hz
    Frequency range (± 10%) 0.7 … 10,000 Hz
    frequency range (± 3 dB) 0.35 … 18,000 Hz
    Resonance frequency &ge≥38,000 Hz
    wide band resolution 0.003 g RMS 0.03 m/s² RMS [1]
    Linearity ≤ 1% [3]
    transverse acceleration sensitivity ≤ 5% [4]
    conditions of use
    (Shock) overload limit ± 10.000 g pk ±98.100 m/s² pk
    Temperature range (operation) -65 … 250 ° F -54 … 121 ° C
    Strain sensitivity (base area) ≤ 0.0005 g/µε ≤ 0.005 (m/s²)/µε [1]
    technical characteristics
    Supply voltage 18 … 30 V DC
    constant power supply 2 … 20 mA
    Output impedance ≤ 100 Ω
    Bias voltage 8 … 12 V DC
    discharging charging time constant 0.5 … 2.6 s
    Settling time < br(auf Bias-Spannung ±10 %) <5 s
    spectral noise (1 Hz) 1,600 µg / √ Hz 15,700 (µm / s ²) / √ Hz [1]
    spectral noise (10 Hz) 350 µg / √ Hz 3.433 (µm / s ²) / √ Hz [1]
    spectral noise (100 Hz) 90 µg /. √ Hz 883 (µm / s ²) / √ Hz [1]
    Spectral noise (1,000 Hz) 32 µg / √ Hz 314 (µm / s ²) / √ Hz [1]
    Physical properties
    Size - height 1.19 in 30.2 mm
    Size - hex 0.50 in 12.7 mm
    weight 0.35 oz 10 grams [1]
    sensor element quartz
    Geometry of the sensor element shear principle
    housing material titanium
    Sealing Hermetically sealed welded
    Electrical connection 10-32-coaxial socket
    connection position above
    Mounting thread 10-32 female thread
    notes
    [1] typically
    [2] sensitivity tolerance for sensors with B or Q option: ±10%
    [3] zero-based balancing line, determined using the method of least squares
    [4] transverse acceleration sensitivity typically ≤ 3%
    [5] details: see PCBs Declaration of conformance PS023
    Accessories
    080A adhesive mounting -1
    080A109 mounting wax -1
    081 B 05 mounting bolts (10-32 on 10-32) -1
    ACS-1 frequency response, traceable to NIST (10 Hz up to the upper 5% point) -1
    M081B05 Mounting bolts 10-32 to M6 x 0.75 -1
    (Q) increased discharge charge time constant
    frequency range (±5%) 0.1 … 7,000 Hz
    frequency range (± 10%) 0.07 … 10,000 Hz
    discharging charging time constant > 10 s
    settling time <5 s
    Accessories
    ACS-4 low frequency calibration (phase and amplitude) of 0.5 … 10 Hz -1
    (B) reduced bias voltage
    bias voltage 4.5 … 7.5 V DC
    power 12 … 30 V DC
    Constant power supply 1 … 20 mA
    measuring range 150 g pk 1.418 m/s ² pk
    wide band resolution 0.01 g RMS 0.1 m/s² RMS
    Spectral noise (1 Hz) 2,300 µg / √ Hz 22.563 (µm / s ²) / √ Hz
    spectral noise (10 Hz) 560 µg / √ Hz 5.494 (µm / s ²) / √ Hz
    spectral noise (100 Hz) 230 µg / √ Hz 2.256 (µm / s ²) / √ Hz
    spectralNoise (1,000 Hz) 65 µg / √ Hz 638 (µm / s ²) / √ Hz
    (J) mass insulation
    frequency range (±5%) 1 … 5,000 Hz
    Frequency range (± 10%) 0.7 … 10,000 Hz
    resonance frequency 22,000 Hz
    electrical insulation ≥100 MΩ
    size - hex 0.50 in 12.7 mm
    size - height 1.24 in 31.5 mm
    (W) waterproof cable connection
    connection position above
    PCB-353B02

    Specific References

    Download

    353B02_drawing.PDF

    Technical drawing

    Download (51.38k)

    353B02_manual.PDF

    Operating instructions

    Download (2.18M)

    353B02_specs.PDF

    Technical data sheet

    Download (528.45k)