PCB-356B18
- Triaxial ICP®-modal vibration sensor,
- Measuring range 5 g,
- Sensitivity 1,000 mV / g,.
- Frequency range 0.5... 3,000 Hz,
- 4-pin female connector on the side
| Basic data | |||
| Sensitivity (±10 %) | 1,000 mV / g | 102 mV/(m/s²) | |
| Measuring range | ±5 gPK | ±49 m/s²PK | |
| Frequency range (≤5 %) | 0.5... 3,000 Hz | ||
| Frequency range (±10 %) | 0.3... 5,000 Hz | ||
| Resonance frequency | ≥20.000 Hz | ||
| Phase response (at 21 ° C) (±5 °) | 2... 2,000 Hz | ||
| Wide band resolution | 0.00005 g RMS | 0.0005 m/s² RMS | [1] |
| Linearity error | ≤1 % | [2] | |
| Transverse acceleration sensitivity | ≤5 % | ||
| Conditions of use | |||
| Overload limit (shock) | ±5.000 gPK | ||
| Temperatureh (operating) | -20 … 170 °F | -29... 77 ° C | |
| strain sensitivity (footprint) | 0.0007 g/µε | 0.007 (m/s²)/µε | [1] |
| specifications | |||
| power supply | 20... 30 V DC | ||
| constant power supply | 2... 20 mA | ||
| output impedance | ≤600 Ω | ||
| Bias voltage | 8... 12 V DC | ||
| discharging charging time constant | 0.8... 3.0 s | ||
| settling time (auf Bias-Spannung ±10 %) | < 12 s | ||
| spectral noise (1 Hz) | 11.4 µg/√Hz | 112 (µm/s²)/√Hz | [1] |
| spectral noise (10 Hz) | 4.0 µg/√Hz | 39 (µm/s²)/√Hz | [1] |
| spectral noise (100 Hz) | 1.2 µg/√Hz | 12 (µm/s²)/√Hz | [1] |
| Spectral noise (1,000 Hz) < | 0.4 µg/√Hz | 4.4 (µm/s²)/√Hz | [1] |
| Physical properties | |||
| Sensor element | Ceramic | ||
| Geometry of the sensor element | Shear principle | ||
| Housing material | Anodized aluminium | ||
| Sealing | Epoxy resin | ||
| Size - height | 0.80 in | 20.3 mm | |
| Size - length | 1.03 in | 26.1 mm | |
| Size - width | 0.80 in | 20.3 mm | |
| Mass | 0.88 oz | 25 grams | [1] |
| Electrical connection | 1/4 "-28 4-pin | ||
| Connecting position | On the side | ||
| Mounting thread | 10-32 female thread | ||
| Notes | |||
| [1] | Typically | ||
| [2] | Zero-balance just, determined using the method of least squares | ||
| [3] | Details: see PCBs Declaration of conformance PS023 | ||
| Included accessories | |||
| 080A109 | Mount wax | -1 | |
| 080A68 | Adhesive mounting, 22.2 mm hex, 10-32 thread, anodized aluminum | -1 | |
| 081B 05 | Mounting bolts (10-32 on 10-32) | -1 | |
| ACS-1T | Frequency response for Triaxial accelerometer, traceable to NIST, 10 Hz up to the upper 5%-Frequenz | -1 | |
| M081B05 | Mounting bolts 10-32 to M6 x 0.75 | -1 | |
| (A) bonding | |||
| Mounting thread | Not exist (bonding) | ||
| Included accessories | |||
| 080A90 | Superglue | -1 | |
| 080A109 | Mount wax | -1 | |
| (J) mass insulation of | |||
| electrical insulation | ≥ 100 MΩ | ||
| size - height | 0.85 in | 21.6 mm | |
| size -. Length | 1.03 in | 26.1 mm | |
| size - width | 0.85 in | 21.6 mm | |
| (T) TEDS memory in accordance with IEEE PP1451. 4 | |||
| Bias voltage | 8.5... 13 V DC | ||
| (TLA) TEDS LMS International - free format | |||
| Bias voltage | 8.5... 13 V DC | ||
| (TLB) TEDS LMS international - format for the automotive industry | |||
| Bias voltage | 8.5... 13 V DC | ||
| (TLC) TEDS LMS international - format for the aviation industry | |||
| Bias voltage | 8.5... 13 V DC | ||
| (TLD) TEDS memory in accordance with IEEE P1451. 4 | |||
| Bias voltage | 8.5... 13 V DC | < |
PCB-356B18
