PCB-356A02
- Triaxial ICP® vibration sensor,
- Measuring range 500 g
- Sensitivity 10 mV / g,.
- Frequency range 1... 5,000 Hz,
- 4-pin female connector on the side
| basic data | |||
| Sensitivity (± 10%) | 10 mV / g | 1.02 mV / (m / s) | |
| measuring range | ± 500 g pk | ± 4.900 m / s² pk | |
| Frequency range (± 5%) | 1 ... 5000 Hz | ||
| Frequency range (± 10%) | 0.5 ... 6,000 Hz | ||
| resonant frequency | ≥25.000 Hz | ||
| Broadband resolution | 0.0005 g RMS | 0.005 m / s RMS | [3] |
| Linearity error (400 g, 3.920 m / s²) | ≤1% | [2] | |
| Linearity error (500 g, 4.900 m / s²) | ?2% | [2] | |
| Lateral acceleration sensitivity | ≤5% | ||
| Operating conditions | |||
| Overload limit (shock) | ± 7.000 g pk | ± 68,600 m / s² pk | |
| The temperature range (operation) | -65 ... 250 ° F | -54 ... 121 ° C | [4] |
| Strain sensitivity (base surface) | 0.001 g / µε | 0.01 (m / s²) / µε | [3] |
| Technical characteristics | |||
| supply voltage | 20 ... 30 V DC | ||
| Constant current supply | 2 ... 20 mA | ||
| output impedance | ≤200 Ω | ||
| Bias voltage | 8 ... 12 V DC | ||
| discharging | 0.6 ... 2.0 s | ||
| Settling time (on the bias voltage ± 10%) | <5 s | ||
| Spectral Noise (1 Hz) | 150 µg/√Hz | 1,472 (µm/s²)/√Hz | [3] |
| Spectral noise (10 Hz) | 25 µg/√Hz | 245 (µm/s²)/√Hz | [3] |
| Spectral noise (100 Hz) | 10 µg/√Hz | 98 (µm/s²)/√Hz | [3] |
| Spectral noise (1,000 Hz) | 5 µg/√Hz | 49 (µm/s²)/√Hz | [3] |
| physical properties | |||
| sensor element | ceramics | ||
| Geometry of the sensor element | shear principle | ||
| housing material | titanium | ||
| seal | hermetically sealed | ||
| Size - Height | 0.55 in | 14.0 mm | |
| Size - Length | 0.80 in | 20.3 mm | |
| Size - Width | 0.55 in | 14.0 mm | |
| Dimensions | 0.37 oz | 10.5 grams | [3] |
| electrical connection | 1/4 "-28 4-pin | ||
| port location | Laterally | ||
| mounting thread | 10-32 female thread | ||
| mounting torque | 10 ... 20 in-lb | 113 ... 225 Ncm | |
| Hints | |||
| [1] | By TEDS option, the bias voltage is increased by 1 V. | ||
| [2] | Zero-based line of best fit, determined by the method of least squares | ||
| [3] | typically, | ||
| [4] | The data for temperatures above 121 ° C only apply to transducers with HT option. | ||
| [5] | Details: see PCB Declaration of Conformance PS023 | ||
| included supply | |||
| 080A109 | mounting wax | -1 | |
| 080A12 | adhesive mounting | -1 | |
| 080A90 | superglue | -1 | |
| 081B05 | Mounting bolts (10-32 to 10-32) | -1 | |
| ACS-1T | Frequency response for triaxial receiver, traceable to NIST, 10 Hz up to the top 5% -frequency | -1 | |
| M081B05 | Mounting bolts 10-32 on M6 x 0.75 | -1 | |
| (HT) High temperature electronics | |||
| Frequency range (± 5%) | 1 ... 5000 Hz | ||
| Frequency range (± 10%) | 0.7 ... 6000 Hz | ||
| Broadband resolution | 0.0008 g RMS | 0.008 microns / sRMS | |
| temperature range | -65 ... 325 ° F | -54 ... 163 ° C | |
| supply voltage | 22 ... 30 V DC | ||
| Bias voltage | 7 ... 15 V DC | ||
| discharging | 0.5 ... 1.5 s | ||
| Spectral Noise (1 Hz) | 400 µg/√Hz | 3,920 (µm/s²)/√Hz | |
| Spectral noise (10 Hz) | 50 µg/√Hz | 490 (µm/s²)/√Hz | |
| Spectral noise (100 Hz) | 25 µg/√Hz | 245 (µm/s²)/√Hz | |
| Spectral noise (1,000 Hz) | 6 .mu.g / ?Hz | 58.8 (µm/s²)/√Hz | |
| (T) TEDS memory IEEE PP1451.4 | |||
| temperature range | -65 ... 250 ° F | -54 ... 121 ° C | |
| Bias voltage | 8.5 ... 13.0 V DC | ||
| (TLA) TEDS LMS International - free format | |||
| temperature range | -65 ... 250 ° F | -54 ... 121 ° C | |
| Bias voltage | 8.5 ... 13.0 V DC | ||
| (TLB) TEDS LMS International - format for the automotive industry | |||
| temperature range | -65 ... 250 ° F | -54 ... 121 ° C | |
| Bias voltage | 8.5 ... 13.0 V DC | ||
| (TLC) TEDS LMS International - format for the aviation industry | |||
| temperature range | -65 ... 250 ° F | -54 ... 121 ° C | |
| Bias voltage | 8.5 ... 13.0 V DC | ||
| (TLD) TEDS memory according to IEEE P1451.4 | |||
| temperature range | -65 ... 250 ° F | -54 ... 121 ° C | |
| Bias voltage | 8.5 ... 13.0 V DC |
PCB-356A02
