PCB-112A22
zoom_out_map

PCB-112A22

  • ICP® pressure sensor with INVAR-membrane,
  • Beschleunigungskompensiert,
  • Measuring range 345 kPa,
  • Sensitivity 14.5 mV / kPa,
  • Lower limiting frequency 0.5 Hz,
  • 10-32 female connector
  • basic data
    measuring range (±5 V output range) 50 psi 345 kPa  
     
    usable range (output range ±10 V) 100 psi 690 kPa [2]
     
    Sensitivity (±15%) ? 100 M? / psi 14.5 mV / kPa  
     
    maximum pressure 500 psi 3,450 kPa  
     
    release Sung 0.001 psi 0.007 kPa  
     
    resonance frequency ≥250,000 Hz    
     
    rise time ≤ 2.0 µs    
     
    Lower limiting frequency (-5%) 0.50 Hz    
     
    linearity ≤1.0% FS   [1]
    conditions of use
    Acceleration sensitivity ≤ 0.002 psi/g ≤ 0,0014 kPa/(m/s²)  
     
    Temperature range (operation) -100 … 275 ° F -73 … 135 ° C  
     
    Temperature coefficient of sensitivity ≤ 0.06 %/°F ≤ 0.108 %/°C  
     
    Maximum shock (for fraction of a second) 3,000 ° F 1,650 ° C  
     
    maximum shock resistance 20,000 g pk 196,000 m/s² pk  
    Technical features
    output polarity (positive pressure) positive    
     
    discharging charging time constant (at room temperature) ≥ 1.0 s    
     
    power 22 … 30 V DC    
     
    constant power supply 2 … 20 mA    
     
    Output impedance < 100Ω    
     
    Bias voltage 8 … 14 V DC    
    Physical properties
    geometry of the sensor element compression principle    
     
    sensor element quartz    
     
    Housing material 17-4 (Stainless steel)    
     
    membrane INVAR    
     
    sealing hermetically sealed welded    
     
    Electrical connection 10-32-coaxial socket    
     
    dimensions (with mounting sleeve) 0.21 oz 6.0 grams  
    notes
    [1] zero-based balancing line, determined using the method of least squares    
     
    [2] for output range up to 10 V, the supply voltage must be at least 24 V DC. At low bias voltage of the sensor, no negative output range is usable up to-10 V.    
     
    [3] details: see PCBs Declaration of conformance PS023    
    equipment
    060A03 installation sleeve, 5 /. 16-24-2A thread, 1/4 "hex, (stainless steel) -1  
     
    060A05 installation sleeve, M7 x 0.75-6 g-thread -1  
     
    065A02 sealing ring f for flush mounting, 0,248 "outside x 0.219" x 0.015 "high brass 3  
     
    065A05 gasket spacer, 0,248" outside x 0,221 "x 0.240" high, 17-4 (Stainless steel) -1  
    (S) Emralon coating
    Coating Emralon    
     
    electrical insulation >100 MΩ    
     
    equipment      
     
    065A22 seal, 0.250 "x outside 0,218" x 0.015 "high, Torlon or Vespel 3  
     
    065A08 insulation ring, 0.250" au need x 0,218 "x 0.027" high, anodized aluminium 3  
    (S) stainless steel diaphragm
    diaphragm 316 L (stainless steel)    
    (W)-waterproof Cable connection
    equipment      
     
    060A03 installation sleeve, 5/16-24-2A thread, 1/4 "hex, (stainless steel) -1  
    (WM) waterproof cable connection
    Accessories      
     
    060A05 installation sleeve, M7 x 0,75-6 g-thread -1  
    PCB-112A22

    Specific References

    Download

    112A22_drawing_1.PDF

    Technical drawing 1

    Download (90.69k)

    112A22_drawing_2.PDF

    Technical drawing 2

    Download (84.32k)

    112A22_manual.PDF

    Operating instructions

    Download (329.14k)

    112A22_specs.PDF

    Technical data sheet

    Download (31.71k)