PCB-(M)102A07
- ICP® pressure sensor with INVAR-membrane,
- Masseisoliert,
- Beschleunigungskompensiert,
- Measuring range 345 kPa,
- Sensitivity 14.5 mV / kPa,
- Lower limiting frequency 0.5 Hz,
- 10-32 female connector
| basic data | |||
| Measurement range (output range ± 5 V) | 50 psi | 345 kPa | |
| Usable overload range (output range is ± 10 V) | 100 psi | 690 kPa | [2] |
| Sensitivity (± 15%) | 100 mV / psi | 14.5 mV / kPa | |
| maximum pressure | 500 psi | 3447 kPa | |
| resolution | 0,001 psi | 0.007 kPa | |
| resonant frequency | ≥250.000 Hz | ||
| rise time | ≤2 microseconds | ||
| Lower limit frequency (-5%) | 0.5 Hz | ||
| linearity error | ≤1,0% FS | [1] | |
| Operating conditions | |||
| acceleration sensitivity | ≤0,002 psi / g | ≤0,0014 kPa / (m / s) | |
| The temperature range (operation) | -100 ... 275 ° F | -73 ... 135 ° C | |
| Temperature coefficient of sensitivity | ≤0,03% / ° F | ≤0,05% / ° C | |
| Maximum temperature shock (for split second) | 3000 ° F | 1650 ° C | |
| Maximum shock resistance | 20,000 g pk | 196,000 m / s pk | |
| Technical characteristics | |||
| Output polarity (positive pressure) | positive | ||
| Discharging time (at room temperature) | ≥1 s | ||
| supply voltage | 20 ... 30 V DC | ||
| Constant current supply | 2 ... 20 mA | ||
| output impedance | <100 Ω | ||
| Bias voltage | 8 ... 14 V DC | ||
| electrical insulation | 100 M | ||
| physical properties | |||
| Geometry of the sensor element | compression principle | ||
| sensor element | quartz | ||
| housing material | stainless steel | ||
| membrane | Invar | ||
| seal | hermetically sealed | ||
| electrical connection | 10-32 coaxial | ||
| Dimensions | 0.39 oz | 11.0 grams | |
| Hints | |||
| [1] | Zero-based line of best fit, determined by the method of least squares | ||
| [2] | For an output range up to 10 V, the supply voltage at least 24 V has to DC , respectively. At low bias voltage of the sensor, no negative output range up to -10 V can be used. | ||
| [3] | Details: see PCB Declaration of Conformance PS023 | ||
| included supply | |||
| 065B01 | Mounting locknut, 3 / 8-24 threads | -1 | |
| (M) Metric assembly | |||
| included supply | |||
| 065A42 | Mounting locknut, M10 x 1.0 thread | -1 | |
| (S) stainless steel diaphragm | |||
| membrane | 316L (stainless steel) |
PCB-(M)102A07
