PCB-(M)102A05
zoom_out_map

PCB-(M)102A05

  • ICP® pressure sensor with INVAR-membrane,
  • Masseisoliert,
  • Beschleunigungskompensiert,
  • Measuring range 690 kPa,
  • Sensitivity 7.3 mV / kPa,
  • Lower limiting frequency 0.5 Hz,
  • 10-32 female connector
  •  

    basic data
    measuring range (±5 V output range) 100 psi 690 kPa  
     
    usable range (output range ±10 V) 1,379 kPa [2]
     
    Sensitivity (± 10 mV/psi) 50 mV / psi 7.3 mV / kPa  
     
    maximum static pressure 1,000 psi 6,900 kPa  
     
    Resolution 0.002 psi 0.014 kPa  
     
    Resonance frequency ≥250,000 Hz    
     
    rise time (reflected pressure) ≤ 2.0 µs    
     
    Lower cut-off frequency (-5%) 0.5 Hz    
     
    Linearity ≤1.0% FS   [1]
    conditions
    acceleration sensitivity ≤ 0.002 psi/g ≤ 0,0014 kPa/(m/s²)  
     
    Temperature range (operation) -100 … 275 ° F -73 … 135 ° C  
     
    Temperature coefficient of sensitivity ≤ 0.03 %/°F ≤ 0,054 %/°C  
     
    maximum shock (f & uuml; r fraction of a second) 3,000 ° F 1,650 ° C  
     
    maximum shock resistance 20,000 g pk 196,000 m/s² PK  
    Technical features
    output polarity (positive pressure) positive    
     
    discharging charging time constant (at room temperature) ≥ 1.0 s    
     
    Supply 20 … 30 V DC    
     
    constant power supply 2 … 20 mA    
     
    output impedance < 100Ω    
     
    Bias voltage 8 … 14 V DC    
     
    Electrical insulation 100 MΩ  
    physical properties
    geometry of the sensor element compression principle    
     
    Sensor element quartz    
     
    housing material stainless steel    
     
    membrane INVAR    
     
    Sealing hermetically sealed welded    
     
    electrical connection 10-32-coaxial socket    
     
    Mass 0.41 oz 11.6 grams  
    notes
    [1] zero-based balancing line, determined using the method of least squares    
     
    [2] for output range supply voltage up to 10 V must be at least 24 V DC. At low bias voltage of the sensor, no negative output range is usable up to-10 V.    
     
    [3] details: see PCBs Declaration of conformance PS023    
    equipment
    065A03 sealing ring, 0.435 "au need x 0,377 "x 0.030" high brass 3  
    (M) metric mounting
    equipment      
     
    065A40 Seal ring, 0.435 "outside x 0,397" x 0.030 "high brass 3  
    (S) stainless steel diaphragm
    diaphragm 316 L (stainless steel)    
    PCB-(M)102A05

    Specific References

    Download

    102A05_drawing.PDF

    Technical drawing

    Download (124.9k)

    102A05_manual.PDF

    Operating instructions

    Download (676.16k)

    102A05_specs.PDF

    Technical data sheet

    Download (427.83k)