PCB-(M)101A02
- ICP® pressure sensor with INVAR-membrane,
- Masseisoliert,
- Beschleunigungskompensiert,
- Measuring range 34,500 kPa,
- Sensitivity 0.145 mV / kPa,
- Lower limiting frequency 0.001 Hz,
- 10-32 female connector
| basic data | |||
| measuring range (±5 V output range) | 5,000 psi | 34,500 kPa | |
| usable range (output range ±10 V) | 10,000 psi | 69,000 kPa | [2] |
| sensitivity (±0, 1 mV / psi) | 1.0 mV / psi | 0.145 mV / kPa | |
| maximum static pressure of | 15,000 psi | 103,000 kPa | |
| resolution | 0.1 psi | kPa 0,690 | |
| resonance frequency | ≷400,000 Hz | ||
| Rise time | ≤1.5 µs | ||
| lower limiting frequency (-5%) | 0.001 Hz | ||
| linearity | ≤2.0% FS | [1] | |
| Conditions of use | |||
| Acceleration sensitivity | ≤ 0.002 psi/g | ≤ 0,0014 kPa/(m/s²) | |
| Temperature range (operation) | -100 … 275 ° F | -73 … 135 ° C | |
| Temperature coefficient of sensitivity | ? 0.?3 %/°F | ? 0,054% /. ° C | |
| maximum shock (for fraction of a second) | 3,000° F | 5,400 ° C | |
| maximum shock resistance | 20,000 g pk | 196,000 m/s² pk | |
| Technical features | |||
| output polarity (positive pressure) | positive | ||
| discharging charging time constant (at room temperature) | ≤500 Ω | ||
| supply | 20 … 30 V DC | ||
| constant power supply | 2 … 20 mA | ||
| Output impedance | <100 ? | ||
| Bias voltage | 8 … 14 V DC | ||
| Electrical insulation | 100 MΩ | ||
| physical properties | |||
| geometry of the sensor element | compression principle | ||
| Sensor element | quartz | ||
| housing material | stainless steel | ||
| membrane | INVAR | ||
| Sealing | hermetically sealed welded | ||
| electrical connection | 10-32-coaxial socket | ||
| mass | 0.44 oz | 12.5 grams | |
| notes | |||
| [1] | zero-based balancing line, determined using the method of least squares | ||
| [2] | For output range supply voltage up to 10 V must be at least 24 V DC. At low bias voltage of the sensor, no negative output range is usable up to-10 V. | ||
| [3] | details: see PCBs Declaration of conformance PS023 | ||
| equipment | |||
| 065A03 | sealing ring, 0.435 "au need x 0,377 "x 0.030" high brass | 3 | |
| (M) metric mounting | |||
| equipment | |||
| 065A40 | Seal ring, 0.435 "outside x 0,397" x 0.030 "high brass | 3 | |
| (S) stainless steel diaphragm | |||
| diaphragm | 316 L (stainless steel) |
PCB-(M)101A02
