PCB-357A08
zoom_out_map

PCB-357A08

  • Miniature vibration sensor with charge output,
  • Mass 0.16 grams,
  • Continuous use temperature to 177 ° C,
  • Measuring range 1000 g,
  • Sensitivity 0.35 pC/g,
  • Upper frequency limit 12.000 Hz,
  • 3 56-connector side,
  • Including connection cable, length 3 m,
    ending on 10-32 plug
  • , ,
    basic data
    sensitivity (±20%) 0.35 pC/g 0.036 pC/(m/s²)
    range ± 1.000 g PK ±9. 800 m/s² pk
    Frequency range (+ 5%)12,000 Hz [2]
    frequency range (+ 10%)20,000 Hz [2]
    Resonance frequency ≥ 70,000 Hz
    linearity ≤ 1% [3]
    transverse acceleration sensitivity ≤ 5%
    Conditions of use
    (shock) overload limit ± 10.000 g pk ±98.100 m/s² PK
    Temperature range -100 … 350 ° F -73 … 177 ° C
    technical
    capacity 140 pF [1]
    Insulation resistance (at 21 ° C) > 10,000 M Ω
    Output polarity negative
    electrical insulation (base) ≥100 MΩ
    physical properties
    sensor element Ceramic
    geometry of the sensor element shear principle
    housing material aluminum
    Waterproofing epoxy resin
    size - height 0.11 in 2.8 mm
    size - diameter 0.16 in 4.1 mm
    Size - width 0.27 in 6.9 mm
    mass 0.006 oz 0.16 grams [1]
    electric Connection 3-56 coaxial plug
    connection position side
    notes
    [1] typically
    [2] the lower cut-off frequency depends on the used signal conditioning electronics.
    [3] zero-based balancing line, determined with the methodthe least squares
    equipment
    030A10 coaxial cable, 3 m, 3-56-plug to 10-32 -1
    039A29 transfer tool -1
    080A109 mounting wax -1
    ACS-1 frequency response, traceable to NIST (10 Hz up to the upper 5% point) -1
    (P) positive output voltage
    PCB-357A08

    Specific References

    Download

    357A08_drawing.PDF

    Technical drawing

    Download (97.65k)

    357A08_specs.PDF

    Technical data sheet

    Download (401.33k)

    357A08_manual.PDF

    Operating instructions

    Download (863.08k)