PCB-(M)355B33
zoom_out_map

PCB-(M)355B33

  • ICP® vibration sensor,
  • With through hole,
  • Masseisoliert,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 2 … 5,000 Hz,
  • 10-32 female connector on the side
  •  

    basic data
    sensitivity (±10%) 10.2 mV/(m/s²)  
     
    range ±50 g pk ±490 m/s 2 pk  
     
    frequency range (±5%) 2 … 5,000 Hz    
     
    Frequency range (± 10%) 1 … 10,000 Hz    
     
    frequency range (± 3 dB) 0,5 … 12,000 Hz    
     
    Resonance frequency ≥25,000 Hz    
     
    wide band resolution 0.0005 g RMS 0.005 m/s² RMS [1]
     
    Linearity ≤1%   [3]
     
    transverse acceleration sensitivity ≤5%   [2]
    conditions of use
    Overload limit (shock) ±5. 000 g pk ±49. 050 m/s² pk  
     
    Temperature range (operation) -65 … 250 ° F -54 … 121 ° C  
    specifications
    power supply 22 … 30 V DC    
     
    constant power supply 2 … 20 mA    
     
    output impedance ≤100 Ω    
     
    Bias voltage 11 … 16 V DC    
     
    discharging charging time constant 0.5 … 2.0 s    
     
    Settling time < br(auf Bias-Spannung ±10 %) < 20 s    
     
    spectral noise (1 Hz) 240 µg / √Hz 2,350 (µm / s ²) / √Hz [1]
     
    spectral noise (10 Hz) 65 µg / √Hz 640 (µm / s ²) / √Hz [1]
     
    spectral noise (100 Hz) 15 µg /. ? Hz 150 (µm / s ²) / √Hz [1]
     
    spectral noise (1,000 Hz) 5 µg / √Hz 50 (µm / s ²) / √Hz [1]
     
    Electrical insulation (base) ≥100 MΩ    
    physical properties
    size - height 0.40 in 10.2 mm  
     
    size - length 0.70 in 17.8 mm  
     
    size - width 0.63 in 15.9 mm  
     
    mass 0.39 oz 11 g [1]
     
    Sensor element quartz    
     
    geometry of the sensor element shear principle    
     
    housing material titanium    
     
    Sealing hermetically sealed    
     
    electrical connection 10-32-coaxial socket    
     
    Connecting position side    
     
    mounting hole    
    notes
    [1] typically    
     
    [2] transverse acceleration sensitivity typically ≤ 3%    
     
    [3] zero-based balancing line, determined using the method of least squares    
     
    [4] details: see PCBs Declaration of conformance PS023    
    equipment
    039A22 Allen wrench, 7/64 "Allen -1  
     
    080A109 mounting wax -1  
     
    081 B 45 insulated mounting screw, 6-32 thread x 5/8 "long (for the model 355 B-02) -1  
     
    ACS-1 frequency response, traceable to NIST (10 Hz up to the upper 5% point) -1  
    (M) metric Assembly
    equipment      
     
    M039A22 Allen wrench for use with thread M3 -1  
     
    M081B45 metric mounting screw -1  
    (T) TEDS memory in accordance with IEEE PP1451. 4
    supply 24 … 30 V DC    
     
    Bias voltage 11.7 … 17 V DC    
    PCB-(M)355B33

    Specific References

    Download

    355B33_drawing_1.PDF

    Technical drawing 1

    Download (31.57k)

    355B33_drawing_2.PDF

    Technical drawing 2

    Download (49.79k)

    355B33_manual.PDF

    Operating instructions

    Download (1.71M)

    355B33_specs.PDF

    Technical data sheet

    Download (80.91k)