PCB-(M)352C18
    zoom_out_map

      PCB-(M)352C18

    • ICP®-miniature vibration sensor,
    • Measuring range 500 g
    • Sensitivity 10 mV / g,
    • Frequency range 1 … 12.000 Hz,
    • Mass 2 grams,
    • 10-32 female connector above
    • basic data
      sensitivity (±10%)10 mV / g1.02 mV/(m/s²)
      range±500 g pk ±4. 905 m/s 2 pk
      frequency range (±5%)1 … 12,000 Hz
      Frequency range (± 10%)0.7 … 18,000 Hz
      frequency range (± 3 dB)0.35 … 25,000 Hz
      Resonance frequency≥ 50,000 Hz
      wide band resolution0.0005 g RMS0.005 m/s² RMS[1]
      Linearity≤ 1%[2]
      transverse acceleration sensitivity≤ 5%[3]
      conditions of use
      Overload limit± 10.000 g pk ±98.100 m/s² pk
      Temperature range-65 … 250 ° F-54 … 121 ° C
      strain sensitivity (base area)< 0.006 g/µε< 0.06 (m/s²)/µε[1]
      specifications
      power supply18 … 30 V DC
      Constant power supply2 … 20 mA
      output impedance≤ 100 Ω
      Bias voltage8 … 12 V DC
      Discharging charging time constant0.4 … 1,2 s
      spectral noise (1 Hz)220 µg / √ Hz2,158 (µm / s ²) / √ Hz[1]
      spectral noise (10 Hz)50 µg / √ Hz490 (µm / s ²) / √ Hz[1]
      spectral noise (100 Hz)10 µg /. √ Hz98 (µm / s ²) / √ Hz[1]
      spectral noise (1,000 Hz)5 µg / √ Hz49 (µm / s ²) / √ Hz[1]
      -physicalProperties
      size - height0.73 in18.5 mm
      size - Allen9/32 in7.1 mm
      Mass0.07 oz2.0 grams[1]
      sensor elementceramic
      geometry of the sensor elementshear principle
      Housing materialtitanium
      sealinghermetically sealed
      wiring 10-32-coaxial Jack
      connection positionabove
      mounting screw5-40 male
      Assembly torque8 … 12 in-lb90 … 135 NCM
      notes
      [1]typically
      [2] Zero-balance just, determined using the method of least squares
      [3]transverse acceleration sensitivity typically ≤ 3%
      [4]details: see PCB declaration of conformance PS023
      equipment
      080A109mounting wax-1
      080A15Adhesive mounting-1
      ACS-1frequency response, traceable to NIST (10 Hz up to the upper 5% point)-1
      (M) metric mounting
      Mounting threadM3 x 0.50 male
      Equipment
      M080A15adhesive mounting-1
      (A) bonding
      Accessories
      080A90cyano-1
      (J) mass insulation
      frequency range (±5%)1 … 10,000 Hz
      Frequency range (± 10%)0.7 … 15,000 Hz
      Frequency range (± 3 dB)0.35 … 20,000 Hz
      resonance frequency40,000 Hz
      Electrical insulation ≥100 MΩ
      size - hex3/8 in9.5 mm
      size - height0.75 in19.1 mm
      mass0.1 oz2.8 grams
      (W) waterproof cable connection
      connection positionabove
      PCB-(M)352C18

      Specific References

      Download

      352C18_drawing.PDF

      Technical drawing

      Download (64.62k)

      352C18_manual.PDF

      Operating instructions

      Download (1.77M)

      352C18_specs.PDF

      Technical data sheet

      Download (91.61k)