PCB-352B70
zoom_out_map

PCB-352B70

  • ICP® vibration sensor,
  • Measuring range 5,000 g,
  • Sensitivity 1 mV / g,
  • Frequency range 0.7 … 9,000 Hz,
  • 10-32 female connector above
  • ,

    basic data
    sensitivity (±25%) 1 mV / g 0.1 mV/(m/s²)  
     
    range ±5. 000 g pk ±49. 000 m/s² pk  
     
    frequency range (±5%) 0.7 … 9,000 Hz    
     
    Frequency range (-3 dB) 0.4 … 20,000 Hz    
     
    integrated filter low-pass    
     
    electric filter corner frequency 23,000 Hz   [1]
     
    the filter slope 12 dB/octave    
     
    resonance frequency ≥55,000 Hz    
     
    Wide band resolution 0.025 g RMS 0.25 m/s² RMS [1]
     
    Linearity error ≤1%   [2]
     
    transverse acceleration sensitivity ≤5%    
    conditions
    (shock) overload limit ± 10.000g pk ±98. 000 m/s² pk  
     
    temperature range (operation) -65 … 250 ° F -54 … 121 ° C  
    specifications
    power supply 20 … 30 V DC    
     
    Constant power supply 2 … 20 mA    
     
    output impedance ≤200Ω    
     
    Bias voltage 8 … 14 V DC    
     
    discharging charging time constant 0.5 … 1  
     
    settling time (on Bias-Spannung ±10%) <5 s    
     
    spectral noise (1 Hz) 7,200 µg / √Hz 70.600 (µm / s ²) / √Hz [1]
     
    Spectral noise (10 Hz) 2,400 µg / √Hz 23,500 (µm / s ²) / √Hz [1]
     
    spectral noise (100 Hz) 740 µg / √Hz 7.250 (µm / s ²) /. ? Hz [1]
     
    Spectral noise (1,000 Hz) 190 µg / √Hz 1,860 (µm / s ²) / √Hz [1]
     
    electrical insulation (base) > 100,000,000Ω    
    Physical properties
    size - height 0.90 in 22.9 mm  
     
    size - hex 3/8 in 9.5 mm  
     
    Mass 0.15 oz 4.3 grams [1]
     
    sensor element ceramic    
     
    geometry of the sensor element Shear principle    
     
    housing material titanium    
     
    sealing hermetic    
     
    Electrical connection 10-32-coaxial socket    
     
    Connection position above    
     
    mounting thread 10-32 female thread    
    notes
    [1] Typically    
     
    [2] zero-based balancing line, determined using the method of least squares    
     
    [3] Details: see PCBs Declaration of conformance PS023    
    equipment
    080A04 adhesive mounting, 0.37 "hex x. 0.2 "thick, 10-32 thread, anodized aluminum -1  
     
    080A109 mounting wax -1  
     
    081 B 05 Mounting bolts (10-32 on 10-32) -1  
     
    ACS-23 frequency response, traceable to NIST (5 Hz … 5% point, equal frequency intervals ±10%) -1  
     
    M081B05 Mounting bolts 10-32 to M6 x 0.75 -1  
    PCB-352B70

    Specific References

    Download

    352B70_drawing.PDF

    Technical drawing

    Download (60.67k)

    352B70_manual.PDF

    Operating instructions

    Download (1.75M)

    352B70_specs.PDF

    Technical data sheet

    Download (85.97k)