PCB-(M)260A13
zoom_out_map

PCB-(M)260A13

  • Triaxial force sensor with charge output,
  • Measuring range (Z axis) 44.5 kN,
  • Measuring range (X - and Y-axes) 17.7 kN,
  • Sensitivity (Z-axis) 3.4 pC/N,.
  • Sensitivity (X - and Y-axes) 7.2 pC/N,.
  • Upper frequency limit 39,000 Hz,.
  • Three 10-32 connectors on the side
  • basic data
    sensitivity (Z axis) (±15%) 15 pC/lb 3.37 pC/N [1]
     
    sensitivity (X - and Y-axes) (±15%) 32 pC/lb 7.19 pC/N [1]
     
    measuring range (Z axis) 10,000 lb 44.48 kN  
     
    measuring range (X - and Y-axes) 4,000 lb 17.7 kN  
     
    Maximum power (Z axis) 11,000 lb 48,93 kN  
     
    maximum force (X - and Y-axes) 4,400 lb 19.57 kN  
     
    maximum moment (Z axis ) 240 ft-lb 325,4 Nm  
     
    maximum moment (X - and Y-axes) 325 ft-lb 440,7 Nm  
     
    upper frequency limit 39,000 Hz    
     
    Linearity ≤ 1% FS   [2]
     
    crosstalk (between X - and Y-axis) ±3%    
     
    Crosstalk (between X and y axis and Z axis) ≤5%    
    Conditions of use
    temperature range -100 … 350 ° F -73 … 177 ° C  
    Technical properties
    (All axes) capacity 70 pF   [3]
     
    Insulation resistance (all axes) ≥1,000,000 MΩ    
     
    output polarity (towards the marks) negative    
    Physical properties
    Preload ≤ 40,000 lb ≤178 kN [4]
     
    Stiffness (Z-axis) 40 lb/µin 7 kN/µm [3]
     
    rigidity (X - and Y-axes) 15 lb/µin 2.6 kN/µm [3]
     
    Size - height 0,790 in 20.07 mm  
     
    size - length 2.25 in 57.1 mm  
     
    size -. Wide 2.25 in 57.1 mm  
     
    size - inner diameter 1,023 in 25,98 mm  
     
    size - diameter of the Messoberflä Che 1,800 in 45.72 mm  
     
    weight 9.88 oz 280 g  
     
    housing material stainless steel    
     
    Sealing hermetically sealed    
     
    electrical connection three 10-32 coaxial jacks    
     
    connection position side    
    Notes
    [1] when using the recommended preload. The sensitivities can depending on the preload to ±5% change.    
     
    [2] zero-based balancing line, determined using the method of least squares    
     
    [3] typically    
     
    [4] should be at least ten times of the operating range used on the X - and Y-axes preload.    
    Equipment
    081A71 mounting bolts -1  
     
    082 B 06 washer -1  
     
    083A11 mounting sleeve -1  
    (W) waterproof cable
    cable exit side    
    (M) metric mounting
    Accessories      
     
    M081A71 mounting bolts -1  
    PCB-(M)260A13

    Specific References

    Download

    260A13_drawing.PDF

    Technical drawing

    Download (117.48k)

    260A13_manual.PDF

    Operating instructions

    Download (1.85M)

    260A13_specs.PDF

    Technical data sheet

    Download (149.59k)