PCB-(M)260A03
basic data | |||
sensitivity (Z axis) (±20%) | 0.25 mV / N | lb/0.06 mV / N | [2] [3] |
sensitivity (X - and Y-axes) (±20%) | 1.25 mV / lb | 0.28 mV / N | [2] [3] |
Measuring range (Z axis) | 10,000 lb | 44.48 kN | |
measuring range (X - and Y-axes) | 4,000 lb | 17.79 kN | |
maximum power ( Z-Achse) | 11,000 lb | 48,93 kN | |
maximum force (X - and Y-axes) | 4,400 lb | 19.57 kN | |
maximum moment (Z-axis) | 240 ft-lb | 325,4 Nm | |
maximum moment (X - and Y-axes) | 325 ft-lb | 440,7 Nm | |
wide band resolution (Z axis) | 0.05 lb RMS | 0,222 N RMS | [1] |
Wide band resolution (X - and Y-axes) | 0.01 lb RMS | 0.04 N RMS | [1] |
Upper frequency limit | 39,000 Hz | ||
bottomCutoff frequency (Z axis) (-5%) | 0.01 Hz | ||
lower limiting frequency (X - and Y-axes) (-5%) | 0.001 Hz | ||
linearity | ?1 % FS | [4] | |
crosstalk (between X - and Y-axis) | ±3% | ||
crosstalk (between X and y axis and Z axis) | ≤5% | ||
Conditions of use | |||
temperature range | -65 … 250 ° F | -54 … 121 ° C | |
technical | |||
maximum Output signal (Z axis) | ±2.5 V DC | ||
maximum output signal (X - and Y-axes) | ±5 V DC | ||
Discharging charging time constant (Z axis) | ≥ 50 s | ||
discharging charging time constant (X - and Y-axes) | ≥ 500 s | ||
Supply voltage (all axes) | 20 … 30 V DC | ||
constant power supply (all axes) | 2 &Emmap; 20 mA | ||
output impedance | ≤100 Ω | ||
Bias voltage | 8 … 14 V DC | ||
Spectral noise (X - and Y-axes) (1 Hz) | 0.003 lb / √Hz | 0,0134 N / √Hz | |
spectral noise (X - and Y-axes) (10 Hz) | 0.001 lb / √Hz | 0,00445 N / √Hz | |
spectral noise (X - and Y-axes) (100 Hz) | 0.0004 lb / √Hz | 0,00178 N / √Hz | |
spectral noise (X - and Y-axis) (1,000 Hz) | 0.0001 lb / √Hz | 0,000445 N / √Hz | |
Spectral noise (Z axis) (1 Hz) | 0.02 lb / √Hz | 0,089 N / √Hz | |
spectral noise (Z axis) (10 Hz) | 0.005 lb / √Hz | 0,0222 N / √Hz | |
spectral noise (Z axis) (100 Hz) | 0.002 lb / √Hz | 0,0089 N / √Hz | |
spectral noise (Z axis) (1,000 Hz) | 0.0005 lb / √Hz | 0,00222 N / √Hz | |
output polarity | positive | ||
Physical properties | |||
Preload | 40,000 lb | 178 kN | [5] |
Stiffness (Z-axis) | 40 lb/µin | 7 kN/µm | [1] |
rigidity (X - and Y-axes) | 15 lb/µin | 2.6 kN/µm | [1] |
Size - height | 0,790 in | 20.07 mm | |
size - length | 2.25 in | 57.1 mm | |
size -. Wide | 2.25 in | 57.1 mm | |
size - inner diameter | 1,023 in | 25,98 mm | |
size - diameter of the Messoberflä Che | 1,800 in | 45.72 mm | |
mass | 9.56 oz | 271 grams | |
housing material | stainless steel | ||
Sealing | hermetically sealed | ||
electrical connection | 4-Pin | ||
connection position | side | ||
Notes | |||
[1] | typically | ||
[2] | at witg of the recommended preload. The sensitivities can depending on the preload to ±5% change. | ||
[3] | the specified sensitivities are valid only when using the supplied bolt. | ||
[4] | zero-based balancing line, determined using the method of least squares | ||
[5] | the preload should be at least ten times the be on the X - and Y-axis of used operating range. | ||
[6] | details: see PCBs Declaration of conformance PS023 | ||
equipment | |||
081A71 | mounting bolt | -1 | |
082 B 06 | washer | -1 | |
083A11 | mounting sleeve | -1 | |
(W) waterproof cable connection | |||
Cable exit | side | ||
(M) metric mounting | |||
equipment | |||
M081A71 | Mounting bolt | -1 |