PCB-(M)261A03
| basic data | |||
| sensitivity (Z axis) (±20%) | 0.25 mV / N | lb/0.06 mV / N | [2] |
| sensitivity (X - and Y-axes) (±20%) | 1.25 mV / lb | 0.28 mV / N | [2] |
| measuring range (Z axis) | 10,000 lb | 44.48 kN | |
| measuring range (X - and Y-axes) | 4,000 lb | 17.79 kN | |
| Maximum power (Z axis) | 11,000 lb | 48,93 kN | |
| maximum force (X - and Y-axes) | 4,400 lb | 19.57 kN | |
| maximum torque ( Z-Achse) | 240 ft-lb | 325,4 Nm | |
| maximum moment (X - and Y-axes) | 325 ft-lb | 440,7 Nm | |
| wide band resolution (Z axis) | 0.05 lb RMS | 0,222 N RMS | [1] |
| Wide band resolution (X - and Y-axes) | 0.01 lb RMS | 0.04 N RMS | [1] |
| Upper cut-off frequency | 10,000 Hz | ||
| lower limiting frequency(Z axis) (-5%) | 0.01 Hz | ||
| Lower limiting frequency (X - and Y-axes) (-5%) | 0.001 Hz | ||
| linearity | ≤ 1% FS | [3] | |
| Crosstalk (between X - and Y-axis) | ±3% | ||
| crosstalk (between X and y axis and Z axis) | ≤5% | ||
| Conditions of use | |||
| temperature range | -65 … 250 ° F | -54 … 121 ° C | |
| technical characteristics | |||
| maximum output signal (Z axis) | ± 2.5 V DC | ||
| maximum output signal (X - and Y-axes) | ±5 V DC | ||
| Discharging charging time constant (Z axis) | ≥ 50 s | ||
| discharging charging time constant (X - and Y-axes) | ≥ 500 s | ||
| Supply voltage (all axes) | 20 … 30 V DC | ||
| constant power supply (all axes) | 2 … 20 mA | ||
| Output impedance | ≤100 Ω | ||
| Bias voltage | 8 … 14 V DC | ||
| Spectral noise (X - and Y-axes) (1 Hz) | 0.003 lb / √Hz | 0,0134 N / √Hz | |
| spectral noise (X - and Y-axes) (10 Hz) | 0.001 lb / √Hz | 0,00445 N / √Hz | |
| spectral noise (X - and Y-axes) (100 Hz) | 0.0004 lb / √Hz | 0,00178 N / √Hz | |
| spectral noise (x and) Y-axis) (1,000 Hz) | 0.0001 lb / √Hz | 0,000445 N / √Hz | |
| spectral noise (Z axis) (1 Hz) | 0.02 lb / √Hz | 0,089 N / √Hz | |
| Spectral noise (10 Hz) (Z axis) | 0.005 lb / √Hz | 0,0222 N / √Hz | |
| Spectral noise (Z axis) (100 Hz) | 0.002 lb / √Hz | 0,0089 N / √Hz | |
| spectral noise (Z axis) (1,000 Hz) | 0.0005 lb / √Hz | 0,00222 N / √Hz | |
| Output polarity | positive | ||
| physical properties | |||
| stiffness(Z axis) | 40 lb./µin | 7 kN/µm | [1] |
| Rigidity (X - and Y-axes) | 15 lb/µin | 2.6 kN/µm | [1] |
| size - height | 3,54 in | 89.9 mm | |
| Size - length | 3.15 in | 80.0 mm | |
| Size - width | 3.15 in | 80.0 mm | |
| mass | 96,25 oz | 2.994 grams | |
| housing material | Stainless steel | ||
| sealing | hermetically sealed | ||
| electrical connection | 4-Pin | ||
| Connecting position | side | ||
| notes | |||
| [1] | typically | ||
| [2] | preload when using the recommended. The sensitivities can depending on the preload to ±5% change. | ||
| [3] | zero-based balancing line, determined using the method of least squares | ||
| [4] | details: see PCBs Declaration of conformance PS023 | ||
| (W) waterproof cable connection | |||
| Cable outlet | On the side |
PCB-(M)261A03
