PCB-(M)261A02
of
| basic data | |||
| sensitivity (Z axis) (±20%) | 2.5 mV / N | lb/0.56 mV / N | [2] |
| sensitivity (X - and Y-axes) (±20%) | 5 mV / lb | 1.12 mV/N | [2] |
| measuring range (Z axis) | 1,000 lb | 4.45 kN | |
| measuring range (X - and Y-axes) | 1,000 lb | 4.45 kN | |
| Maximum power (Z axis) | 1,320 lb | 5.87 kN | |
| maximum force (X - and Y-axes) | 1,000 lb | 4.45 kN | |
| maximum moment (Z axis) | 40 ft-lb | 54,23 Nm | |
| maximum moment (X - and Y-axes) | 70 ft-lb | 94,91 Nm | |
| wide band resolution (X - and Y-axes) | 0.006 lb RMS | 0.027 N RMS | [1] |
| Wide band resolution (X - and Y-axes) | 0.006 lb RMS | 0.027 N RMS | [1] |
| Upper cut-off frequency | 10,000 Hz | ||
| lower limiting frequency(Z axis) (-5%) | 0.01 Hz | ||
| Lower limiting frequency (X - and Y-axes) (-5%) | 0.001 Hz | ||
| linearity | ≤ 1% FS | [3] | |
| Crosstalk (between X - and Y-axis) | ±3% | ||
| crosstalk (between X and y axis and Z axis) | ≤5% | ||
| Conditions of use | |||
| temperature range | -65 … 250 ° F | -54 … 121 ° C | |
| technical characteristics | |||
| maximum output signal (Z axis) | ± 2.5 V DC | ||
| maximum output signal (X - and Y-axes) | ±5 V DC | ||
| Discharging charging time constant (Z axis) | ≥ 50 s | ||
| discharging charging time constant (X - and Y-axes) | ≥ 500 s | ||
| Supply voltage (all axes) | 20 … 30 V DC | ||
| constant power supply (all axes) | 2 … 20 mA | ||
| Output impedance | ≤100 Ω | ||
| Bias voltage | 8 … 14 V DC | ||
| Output polarity | positive | ||
| physical properties | |||
| stiffness (Z axis) | 19 lb/µin | 3.3 kN/µm | [1] |
| Rigidity (X - and Y-axes) | 6 lb/µin | 1 kN/µm | [1] |
| mass | 34.40 oz | 975 grams | |
| go äusematerial | stainless steel | ||
| sealing | hermetically sealed | ||
| electrical connection | 4-Pin | ||
| Connection position | side | ||
| notes | |||
| [1] | typically | ||
| [2] | when using the recommended preload. The sensitivities can depending on the preload to ±5% change. | ||
| [3] | zero-based balancing line, determined using the method of least squares | ||
| [4] | Details: see PCBs Declaration of conformance PS023 | ||
| (W) waterproof cable connection | |||
| Cable outlet | On the side |
PCB-(M)261A02
