PCB-(M)261A01
    zoom_out_map

      PCB-(M)261A01

      • Triaxial ICP® power measurement element
      • Measuring range (Z axis) 4.45 kN,
      • Measuring range (X - and Y-axes) 2.22 kN,
      • Sensitivity (Z-axis) 0.56 mV / N,
      • Sensitivity (X - and Y-axes) 2.25 mV / N,
      • Frequency range (Z axis) 0.01 … 10,000 Hz,
      • Frequency range (X - and Y-axes) 0.001 … 10,000 Hz,
      • 4-pin female connector on the side
      basic data
      Sensitivity (Z-axis) (± 20%)2.5 mV / lb0.56 mV / N[2]
      Sensitivity (X- and Y-axis) (± 20%)10 mV / lb2.25 mV / N[2]
      Measurement range (Z axis)1,000 lb4.45 kN
      Measurement range (X- and Y-axis)500 lb2.22 kN
      Maximum force (Z-axis)1,320 lb5.87 kN
      Maximum force (X- and Y-axis)660 lb2.94 kN
      Maximum torque (Z-axis)14 ft-lb18.98 Nm
      Maximum torque (X- and Y-axis)13 ft-lb17.63 Nm
      Broadband resolution (Z-axis)0.006 lb RMS0.027 N RMS[1]
      Broadband resolution (X- and Y-axis)0.002 lb RMS0.0089 N RMS[1]
      Upper limit frequency10,000 Hz
      Lower frequency limit (Z-axis) (-5%)0.01 Hz
      Lower limit frequency (X and Y-axis) (-5%)0.001 Hz
      linearity error≤1% FS[3]
      Crosstalk (between X and Y-axis)± 3%
      Crosstalk (between X / Y-axis and Z-axis)± 5%
      Operating conditions
      temperature range-65 ... 250 ° F-54 ... 121 ° C
      Technical characteristics
      Maximum output signal (Z-axis)± 2.5 V DC
      Maximum output signal (X and Y-axis)± 5 V DC
      Discharge time constant (Z-axis)?50 s
      Discharge time (X and Y-axis)≥500 s
      Supply voltage (all axes)20 ... 30 V DC
      Constant current power supply (all axes)2 ... 20 mA
      output impedance≤100 Ω
      Bias voltage8 ... 14 V DC
      Spectral Noise (X and Y axis) (1 Hz)0.00003 lb / Hz0.00134 N / Hz
      Spectral noise (X- and Y-axis) (10 Hz)0.00015 lb / Hz0.000668 N / Hz
      Spectral noise (X- and Y-axis) (100 Hz)0.00005 lb / Hz0.000223 N / Hz
      Spectral noise (X- and Y-axis) (1000 Hz)0.000015 lb / Hz0.0000668 N / Hz
      Spectral noise (Z-axis) (1 Hz)0.0015 lb / Hz0.0068 N / Hz
      Spectral noise (Z-axis) (10 Hz)0.00055 lb / Hz0.00245 N / Hz
      Spectral noise (Z-axis) (100 Hz)0.0002 lb / Hz0.000891 N / Hz
      Spectral noise (Z-axis) (1000 Hz)0.000055 lb / Hz0.000245 N / Hz
      output polaritypositive
      physical properties
      Stiffness (Z-axis)10 lb / microinches1.75 kN / micron[1]
      Stiffness (X- and Y-axis)4 lb / microinches0.7 kN / micron[1]
      Dimensions13.60 oz386 grams
      housing materialstainless steel
      sealhermetically sealed
      electrical connection4-pin
      port locationLaterally
      Hints
      [1]typically,
      [2]When the recommended preload. The sensitivities can change by ± 5%, depending on the used preload.
      [3]Zero-based line of best fit, determined by the method of least squares
      [4]Details: see PCB Declaration of Conformance PS023
      (W) Waterproof cable connection
      cable outletLaterally
      PCB-(M)261A01

      Specific References

      Download

      261A01_drawing.PDF

      Technical drawing

      Download (3.45M)

      261A01_manual.PDF

      Operating instructions

      Download (3.73M)

      261A01_specs.PDF

      Technical data sheet

      Download (79.2k)