PCB-356M57/NC
| basic data | |||
| sensitivity (±10%) | 10 mV / g | 1.02 mV/(m/s²) | |
| range | ±500 g pk | ±4. 905 m/s 2 pk | |
| frequency (Y - and Z-axis) < br(≤5 %) | 2 … 10,000 Hz | ||
| Frequency range (X-axis) (±5%) | 2 … 7,000 Hz | ||
| resonance frequency | ≥ 55,000 Hz | ||
| Wide band resolution | 0.003 g RMS | 0.03 m/s² RMS | [1] |
| linearity error | ≤ 1% | [4] | |
| transverse acceleration sensitivity | ≤ 5% | ||
| conditions of use | |||
| Overload limit (shock) | ±10. 000 g pk | ±98.100 m/s² pk | |
| temperature range (operation) | -65 … 250 ° F | -54 … 121 ° C | |
| specifications | |||
| power supply | 18 … 30 V DC | ||
| Constant power supply | 2 … 20 mA | ||
| output impedance | ≤200Ω | ||
| Bias voltage | 7 … 11 V DC | ||
| Discharging charging time constant | 0.3 … 1,0 s | ||
| settlingbr(auf Bias-Spannung ±10 %) | < 3 s | ||
| Spectral noise (1 Hz) | 1,000 µg / √ Hz | 9.810 (µm / s ²) / √ Hz | [1] |
| spectral noise (10 Hz) | 300 µg / √ Hz | 2.943 ( µm / s ²) / √ Hz | [1] |
| spectral noise (100 Hz) | 80 µg / √ Hz | 785 (µm / s ²) / √ Hz | [1] |
| spectral noise ( 1,000 Hz) | 25 µg / √ Hz | 308 (µm / s ²) / √ Hz | [1] |
| physical properties | |||
| sensor element | ceramic | ||
| Geometry of the sensor element | shear principle | ||
| housing material | titanium | ||
| sealing | hermetically sealed welded | ||
| Size - height | 0.4 in | 10.2 mm | |
| size - length | 0.4 in | 10.2 mm | |
| Size - width | 0.4 in | 10.2 mm | |
| dimensions (without cable) | 0.14 oz | 4 grams | [1] |
| wiring | Integrated cable | [3] | |
| cable exit | side | ||
| cable termination | 1/4 "-28 4-pin socket | ||
| " | |||
| Cable length | 5 ft | 1.5 m | |
| cord type | type 034, 4-wire shielded cable | [2] | |
| mounting thread | 5-40 female | ||
| Assembly torque | 4 … 5 in-lb | 45 … 56 NCM | |
| notes | |||
| [1] | typically | ||
| [2] | The only outgasing material is the Teflon is used for the cable sheath. | ||
| [3] | TML: ≤ 1% CVCM: ≤ 0.1% | ||
| [4] | zero-based balancing line, determined using the method of least squares | ||
| [5] | details: see PCBs Declaration of conformance PS023 | ||
| Accessories | |||
| 080A | Adhesive mounting | -1 | |
| 080A109 | mounting wax | -1 | |
| 081A27 | mounting bolts, 5-40 on 5-40 | -1 | |
| 081A90 | mounting bolts, 10-32 on 5-40 | -1 | |
| ACS-1 T | frequency response for triaxialen Transducer, traceable to NIST, 10 Hz up to the upper 5% frequency | -1 | |
| M081A27 | metric mounting bolts, 5-40 M3 x 0.50 | -1 |
PCB-356M57/NC
