PCB-HTJ356B01/NC
zoom_out_map

PCB-HTJ356B01/NC

  • Triaxial ICP® high-temperature vibration sensor,
  • Mass-insulated mounting,
  • Continuous use temperature up to 180 ° C,
  • Mass 1 gram,
  • Measuring range 1000 g,
  • Sensitivity 5 mV / g,
  • Frequency range 2... 8,000 Hz,
  • Integrated cable, length 1.5 m,
    ending on 4-pin female connector,
  • Without extension cable
 English:SI: 
PERFORMANCE
Sensitivity (±20 %) 5 mV/g 0.51 mV/(m/s²)  
Measurement Range ±1000 g pk ±9810 m/s² pk  
Frequency Range (±5 %) (y or z axis) 2 to 8000 Hz 2 to 8000 Hz  
Frequency Range (±5 %) (x axis) 2 to 5000 Hz 2 to 5000 Hz  
Frequency Range (+1 dB) (x axis) ≥8 kHz ≥8 kHz  
Resonant Frequency ≥50 kHz ≥50 kHz  
Broadband Resolution (1 to 10000 Hz) 0.003 g rms 0.03 m/s² rms [2] 
Non-Linearity ≤1 % ≤1 % [1] 
Transverse Sensitivity ≤5 % ≤5 %  
ENVIRONMENTAL
Overload Limit (Shock) ±10000 g pk ±98100 m/s² pk  
Temperature Range (Operating) -65 to +356 °F -54 to +180 °C [3] 
Temperature Response See Graph %/°F See Graph %/°F [2] 
ELECTRICAL
Excitation Voltage 18 to 30 VDC 18 to 30 VDC  
Constant Current Excitation 2 to 4 mA 2 to 4 mA [4] 
Output Impedance ≤200 Ohm ≤200 Ohm  
Output Bias Voltage 7 to 12 VDC 7 to 12 VDC  
Discharge Time Constant 0.24 to 1.0 sec 0.24 to 1.0 sec  
Settling Time (within 10% of bias) <3 sec <3 sec  
Spectral Noise (1 Hz) 1200 µg/√Hz 11772 (µm/sec2)/√Hz [2] 
Spectral Noise (10 Hz) 300 µg/√Hz 2943 (µm/sec2)/√Hz [2] 
Spectral Noise (100 Hz) 100 µg/√Hz 981 (µm/sec2)/√Hz [2] 
Spectral Noise (1 kHz) 30 µg/√Hz 294 (µm/sec2)/√Hz [2] 
PHYSICAL
Sensing Element Ceramic Ceramic  
Sensing Geometry Shear Shear  
Housing Material Titanium Titanium  
Sealing Hermetic Hermetic  
Size - Height 0.25 in 6.35 mm  
Size - Length 0.25 in 6.35 mm  
Size - Width 0.25 in 6.35 mm  
Weight (without cable) 0.04 oz 1.0 gm [2] 
Electrical Connector Integral Cable Integral Cable  
Electrical Connection Position Side Side  
Cable Termination 1/4-28 4-Pin Jack 1/4-28 4-Pin Jack [3] 
Cable Length 5 ft 1.5 m  
Cable Type 034 4-cond Shielded 034 4-cond Shielded  
Mounting Adhesive Adhesive  

All specifications are at room temperature unless otherwise specified.


CE

Product Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Terminating connector limited to 325F (163C).
[4] Increased current up to 20mA acceptable to 250F (121C)
[5] See PCB Declaration of Conformance PS023 for details.
Accessories:
Supplied
034G05 4-cond. shielded cable, 5 ft (1.5M), 4-pin plug to (3) BNC plugs (1)
080A109 Petro Wax (1)
080A90 Quick Bonding Gel (1)
ACS-1T NIST traceable triaxial amplitude response, 10 Hz to upper 5% frequency. (1)
Optional Versions:
(J) Ground Isolated
  ENGLISH SI
    Size - Width .28 in 7.10 mm
    Size - Length .28 in 7.10 mm
    Size - Height .28 in 7.10 mm
    Weight .04 oz 1.2 gm
    Electrical Isolation >100000000 Ohm
(W) Water Resistant Cable
  ENGLISH SI
    Electrical Connector Sealed Integral Cable
PCB-HTJ356B01/NC

Specific References

Download

HTJ356B01_specs.PDF

HTJ356B01_specs

Download (77.25k)

HTJ356B01_drawing.PDF

HTJ356B01_drawing

Download (79.73k)

HTJ356B01_manual.PDF

HTJ356B01_manual

Download (1.82M)