PCB-350B50
zoom_out_map

PCB-350B50

  • Triaxial ICP® shock acceleration sensor,
  • Masseisoliert,
  • With electric filters < br(-3 dB bei?20.000 Hz),
  • range 10,000 g,
  • sensitivity 0.5 mV / g,
  • frequency range 3 … 10,000 Hz,
  • integrated cable, length 1.5 m,
    ending on 4-pin female connector,
  • Including extension cable, length 1.5 m,
    ending to three BNC
  • basic data
    sensitivity (±30%) 0.5 mV / g 0.05 mV/(m/s²)
    range ±10. 000 g PK ±98. 000 m/s² pk
    Frequency range (± 1 dB) 3 … 10,000 Hz
    frequency range (-3 dB) 1.5 … 20,000 Hz [3]
    Resonance frequency ≥60.000 Hz
    wide band resolution 0.03 g RMS 0.29 m/s² RMS [1]
    Linearity ≤ 2% [2]
    transverse acceleration sensitivity ≤ 5%
    conditions of use
    Overload limit (shock) ±25. 000 g pk ±245. 000 m/s² pk
    Temperature range (operation) -65 … 250 ° F -54 … 121 ° C
    Technical properties
    Supply voltage 18 … 30 V DC
    Constant power supply 2 … 20 mA
    output impedance ≤ 100 Ω
    Bias voltage 8 … 12 V DC
    discharging charging time constant 0.5 … 1.0 s
    settling time
    (on Bias-Spannung ±10%)
    <5 s
    electrical insulation (base) ≥ 100 MΩ
    physical properties
    Sensor element ceramic
    geometry of the sensor element shear principle
    housing material titanium
    Sealing hermetically sealed
    size - height 0.32 in 8.2 mm
    size -Length 0.72 at 18.3 mm
    size-Width 0.72 at 18.3 mm
    dimensions (without cable) 0.3 oz 8.0 grams [1]
    electrical connection integrated cable
    Cable exit side
    cable termination 4-pin connector (1/4 "28")
    cable length 5.0 ft 1.52 m
    cord type type 034, 4-wire shielded cable
    mounting hole
    Notes
    [1] typically
    [2] zero-based balancing line, determined using the method of least squares
    [3] second-order low-pass filter
    [4] details: see PCBs Declaration of conformance PS023
    Accessories
    034 G 05 shielded 4 Conductor cable, length 1.5 m, 4-pin connector to three BNC -1
    080A197 mounting plate for the model 350 B 50 -1
    081A112 insulated mounting screw 6-32 thread x 12.7 mm long (for model 350 B 50) 4
    ACS-14 T Hopkinson bar calibration for shock resistance -1
    ACS-22 T frequency response for Triaxial accelerometer, traceable to NIST (100 Hz to the upper ±1dB point -1)
    PCB-350B50

    Specific References

    Download

    350B50_drawing.PDF

    Technical drawing

    Download (484.93k)

    350B50_specs.PDF

    Technical data sheet

    Download (452.26k)

    350B50_manual.PDF

    Operating instructions

    Download (2.47M)