PCB-HT(M)641B62
zoom_out_map

PCB-HT(M)641B62

  • Continuous use temperature up to 125 ° C,
  • vibration transmitter with power output according to
    the RMS value of vibration speed,
  • measuring range 0 … 50.8 mm / s RMS,
  • output range 4 … 20 mA,
  • Frequency range 10 … 1,000 Hz,
  • integrated armored cable, length 3 m,
    ending on cut end
  • ""

    basic data
    range 0,0 … 2 in / s RMS 0.0 … 50.8 mm / s RMS [1]"
     
    Output area 4 … 20 mA    
     
    frequency range (± 10%) 600 … 60,000 cpm 10 … 1,000 Hz [2] [3]
     
    Wide band resolution 0.01 in / s RMS /0.26 mm / s RMS [4]
     
    Linearity error ≤1%    
    conditions of use
    temperature range -40 … 257 ° F -40 … 125 ° C  
    technical Properties
    power 12 … 30 V DC    
     
    settling time (area within ±2% of full scale)   
     
    electrical insulation (housing) > 100,000,000Ω    
    physical properties
    size -. Allen 1.0 in 25.4 mm  
     
    size - height 4.2 in 107 mm  
     
    dimensions (without cable) 4.7 oz 131 grams  
     
    Mounting thread 1/4 "-28 UNF No metric equivalent  
     
    Assembly torque 3 … 5 ft-lb 4 … 7 Nm  
     
    sensor element ceramic    
     
    geometry the sensor element shear principle    
     
    housing material stainless steel    
     
    sealing hermetically sealed welded    
     
    Electrical connection integrated armoured cable    
     
    cable outlet top    
     
    Terminal assigNment (red wire) output signal 4 … 20 mA positive    
     
    pin assigNment (blue wire) output signal 4 … 20mA negative    
     
    Cable length 10 ft 3.0 m  
     
    cable type polyurethane   [5]
    notes
    [1] conversion factor 1 in / sec = 0.0254 m/sec.    
     
    [2] at frequencies below 5 Hz, the output signal fluctuates.    
     
    [3] 1 Hz 60 = cpm ("Cycles Per Minute": rpm).    
     
    [4] typically    
     
    [5] two-core cable with stainless steel reinforcement    
     
    [6] Details: see PCBs Declaration of conformance PS039    
    Equipment
    081A40 mounting bolts with 1/4 "-28 thread -1  
     
    ICS-4 frequency response for uniaxial" Cpm sensors from 0 (0 Hz) up to the upper 10% frequency of vibration transmitter -1  
    (RV) raw signal output - 100 mV/g (±20%)
    electrical connection integrated armoured cable    
     
    Connections (red wire) output signal 4 … 20 mA positive    
     
    (black wire) pin assigNment output signal 4 … 20 mA negative    
     
    Pin assigNment (white wire) raw signal positive    
     
    Pin assigNment (green wire) raw signal negative    
    (M) metric mounting
    equipment      
     
    M081A61 metric mounting bolts with M6 thread -1  
    PCB-HT(M)641B62

    Specific References

    Download

    HT641B62_drawing.PDF

    Technical drawing

    Download (41.73k)

    HT641B62_manual.PDF

    Operating instructions

    Download (682.06k)

    HT641B62_specs.PDF

    Technical data sheet

    Download (71.45k)