PCB-HT(M)640B02
zoom_out_map

PCB-HT(M)640B02

  • Continuous use temperature up to 125 ° C,
  • vibration transmitter with power output according to
    the peak value of vibration speed,
  • measuring range 0 … 50.8 mm / s,
  • output range 4 … 20 mA,
  • Frequency range 3 … 1,000 Hz,
  • 2-pin female connector above
  • """

    basic data
    range 0,0 … 2 in / s pk 0.0 … 50.8 mm / s pk [1]
     
    Output area 4 … 20 mA    
     
    frequency range (± 10%) 180 … 60,000 cpm 3 … 1,000 Hz [2] [3]
     
    Wide band resolution 0.005 in / s pk 0.13 mm / s pk [4]
     
    linearity error ≤1%    
    conditions of use
    temperature range -40 … 257 ° F -40 … 125 ° C  
    technical characteristics
    Supply voltage 12 … 30 V DC    
     
    settling time (area within ±2% of full scale)   
     
    electrical insulation (housing) >100 MΩ    
    physical properties
    size - hex 1.0 in 25.4 mm  
     
    Size - height 2.6 in 66 mm  
     
    weight 4.7 oz 131 grams  
     
    mounting thread 1/4 "-28 UNF No metric equivalent  
     
    Assembly torque 3 … 5 ft-lb 4 … 7 Nm  
     
    sensor element ceramic    
     
    geometry the sensor element shear principle    
     
    housing material stainless steel    
     
    sealing hermetically sealed welded    
     
    Electrical connection 2-pin connector (MIL-C-5015)    
     
    connection position above    
     
    Terminal assigNment (PIN A) Output signal 4 … 20 mA positive    
     
    Pin assigNment (PIN B) output signal 4 … 20mA negative    
    notes
    [1] conversion factor 1 in / sec = 0.0254 m/sec.    
     
    [2] at frequencies below 5 Hz, the output signal fluctuates.    
     
    [3] 1 Hz 60 = cpm ("Cycles Per Minute": rpm).    
     
    [4] typically    
     
    [5] details: see PCB Declaration of Conformance PS039    
    equipment
    081A40 mounting bolts with 1/4 "-28 thread -1  
     
    ICS-4 frequency response" cpm for uniaxial sensors from 0 (0 Hz) up to the upper 10% frequency of vibration transmitter -1  
    (RV) raw signal output - 100 mV/g (±20%)
    wiring 3-pin MIL-C-5015    
     
    pin assigNment (PIN A) output signal 4 … 20 mA positive    
     
    pin assigNment (PIN B) output signal 4 … 20 mA negative    
     
    pin assigNment (PIN C) raw signal positive    
    (M) metric mounting
    equipment      
     
    M081A61 metric mounting bolts with M6 thread -1  
    PCB-HT(M)640B02

    Specific References

    Download

    HT640B02_drawing.PDF

    Technical drawing

    Download (190.57k)

    HT640B02_manual.PDF

    Operating instructions

    Download (491.72k)

    HT640B02_specs.PDF

    Technical data sheet

    Download (53.33k)