PCB-HT(M)635A01
- Industrial ICP® vibration sensor,
- Continuous use temperature up to 163 ° C,
- With through hole,
- Sensitivity 100 mV/g,
- Measurement range 50 g,
- Frequency range 0.8 … 15,000 Hz,
- Frequency response calibration,
- 2-pin female connector on the side
| basic data | |||
| Sensitivity (± 5%) | 100 mV / g | 10.2 mV / (m / s) | [5] |
| measuring range | ± 50 g | ± 490 m / s | |
| Frequency range (± 10%) | 102 ... 720,000 cpm | 1.7 ... 12,000 Hz | [3] |
| Frequency range (± 3 dB) | 48 ... 900,000 cpm | 0.8 ... 15,000 Hz | |
| resonant frequency | 1800 kcpm | 30,000 Hz | [1] |
| Broadband resolution | 240 ug | 2.354 microns / s² | [1] |
| linearity error | ± 1% | [4] | |
| Lateral acceleration sensitivity | ≤5% | ||
| Operating conditions | |||
| Overload limit (shock) | 5000 g pk | 49,050 m / s pk | |
| temperature range | -65 ... 325 ° F | -54 ... 163 ° C | |
| protection | IP68 | ||
| Technical characteristics | |||
| Settling time (on the bias voltage ± 1%) | ≥2 s | ||
| discharging | ?0,2 s | ||
| supply voltage | 18 ... 28 V DC | ||
| Constant current supply | 2 ... 10 mA | ||
| output impedance | <150 ? | ||
| Bias voltage | 8 ... 15 V DC | ||
| Spectral noise (10 Hz) | 8 µg/√Hz | 78.5 (µm/s²)/√Hz | [1] |
| Spectral noise (100 Hz) | 2 µg/√Hz | 19.6 (µm/s²)/√Hz | [1] |
| Spectral noise (1,000 Hz) | 1 µg/√Hz | 9.81 (µm/s²)/√Hz | [1] |
| electrical insulation | > 100 M | ||
| physical properties | |||
| Size - Diameter | 1.13 in | 28.7 mm | |
| Size - Height | 0.82 in | 20.8 mm | |
| Dimensions | 3 oz | 86 grams | |
| attachment | Through Hole | ||
| mounting thread | 1/4 "-28 | [2] | |
| mounting torque | 2 ... 5 ft-lb | 2.7 ... 6.8 Nm | |
| sensor element | ceramics | ||
| Geometry of the sensor element | shear principle | ||
| housing material | stainless steel | ||
| seal | Hermetically sealed | ||
| electrical connection | 2-pin socket (MIL-C-5015) | ||
| port location | Laterally | ||
| Hints | |||
| [1] | typically, | ||
| [2] | Mountable with M6 screw | ||
| [3] | Tolerance of the upper limit frequency: ± 10% | ||
| [4] | Zero-based line of best fit, determined by the method of least squares | ||
| [5] | Conversion factor 1 g = 9,81 m / s² | ||
| included supply | |||
| 081A97 | Through bolt 1/4 "-28 | -1 | |
| ICS-8 | Frequency response for uniaxial pickup of 600 cpm (10 Hz) up to the upper 10% frequency. | -1 |
PCB-HT(M)635A01
