PCB-HT(M)602D61/075BZ-05
basic data | |||
sensitivity (±10%) | 100 mV/g | 10.2 mV/(m/s²) | [1] |
measuring range | ±50 g | ±490 m / s² | |
Frequency range (± 3 dB) | 48 … 480,000 cpm | 0.8 … 8,000 Hz | [3] [4] |
resonance frequency | 1,500 kcpm | 25,000 Hz | [2] |
Wide band resolution | 150 µg | 1.472 µm / s ² | [2] |
linearity | ≤1% | [5] | |
Transverse acceleration sensitivity | ≤ 5% | ||
conditions of use | |||
Overload limit (shock) | 5,000 g pk | 49,050 m/s² pk | |
temperature range | -65 … 325 ° F | -54 … 162 ° C | |
Type of protection | IP67 | ||
Technical characteristics | |||
settling time (on bias voltage ± 1%) | ≤ 2.0 s | ||
discharging charging time constant | ≥ 0.2 s | ||
Power | 18 … 28 V DC | ||
constant power supply | 2 … 20 mA | ||
Output impedance | < 150 Ω | ||
Bias voltage | 8 … 12 V DC | ||
Spectral noise (10 Hz) | 9.0 µg / √ Hz | 88,3 (µm / s ²) / √ Hz | [2] |
spectral noise (100 Hz) | 4.0 µg / √ Hz | 39.2 (µm / s ²) / √ Hz | [2] |
spectral noise (1,000 Hz) | 2.0 µg / √ Hz | 19.6 (µm / s ²) / √ Hz | [2] |
Electrical insulation | ≥ 100 MΩ | ||
physical properties | |||
size - length | 2.1 in | 53.3 mm | |
size ße - width | 1.0 in | 25.4 mm | |
size - height | 1.0 in | 25.4 mm | |
dimensions (without cable) | 5.4 oz | 153 grams | |
Assembly torque | 2 … 5 ft-lb | 2.7 … 6.8 Nm | |
sensor element | ceramic | ||
geometry of the sensor element | Shear principle | ||
Housing material | stainless steel | ||
electrical connection | integrated armoured cable | ||
Cable exit | side | ||
cable termination | cut end | ||
electrical connection (white wire) | Signal / supply | ||
electrical connection (black wire) | ground | ||
cable length | 75 ft (of which reinforced 5 ft) | 22.9 m (of which Another detail of the 1.5 m) | |
cable type | type 055, screened two-core cable with Teflon coating and reinforcing | ||
notes | |||
[1] | conversion factor = 1 g 9.81 m/s² | ||
[2] | typically | ||
[3] | the upper cut-off frequency tolerance: ±10% | ||
[4] | 1 Hz 60 = cpm ("Cycles Per Minute": rpm). | ||
[5] | zero-based balancing line, determined using the method of least squares | ||
equipment | |||
081A73 | Mounting screw 1/4 "-28 x 1.34" | -1 | |
(M) metric mounting | |||
equipment | |||
M081A73 | metric Mounting screw M6 thread | -1 |