PCB-682A02
- ICP® power supply unit,
- For mounting on a DIN rail
| Basic data | |||
| Number of channels | 1 | ||
| Voltage gain | 1 x / 10 x / 100 x | [1] | |
| Frequency range (± 1 dB) | 60... more than 6,000,000 cpm | 1... 100,000 Hz | [2] |
| Linearity error | ≤2% < | ||
| Conditions of use | |||
| Temperature range | 32... 158 ° F | 0... 70 ° C | |
| Technical properties | |||
| Supply | DC voltage | ||
| Voltage (±10 %) | 24 V DC | ||
| Power consumption | ≤60 mA | ||
| Supply voltage (±1 V <)small >DC) (for sensor) | 18 V DC | [3] | |
| Constant power supply (for sensor) | 4/10 mA | [1] | |
| Spectral noise (10 Hz) | 0.8 µV/√Hz | [7] [5] | |
| Spectral RAsmall house (100 Hz) | 0.5 µV/√Hz | [7] [5] | |
| Spectral noise (1,000 Hz) | 0.5 µV/√Hz | [7] [5] | |
| Spectral noise (10,000 Hz) | 0.6 µV/√Hz | [7] [5] | |
| Wide band noise (1... 10,000 Hz) | 50µV | [7] [5] | |
| Spectral noise (10 Hz) | 7.5 µV/√Hz | [6] [5] | |
| Spectral noise (100 Hz) | 3.6 µV/√Hz | [6] [5] | |
| Spectral noise (1,000 Hz) | 3.2 µV/√Hz | [6] [5] | |
| Spectral noise (10,000 Hz) | 6.0 µV/√Hz | [6] [5] | |
| Wide band noise (1... 10,000 Hz) | 400 µV</td> | [6] [5] | |
| Spectral noise (10 Hz) | 80 µV/√Hz | [4] [5] | |
| Spectral noise (100 Hz) | 40 µV/√Hz | [4] [5] | |
| Spectral noise (1,000 Hz) | 32 µV/√Hz | [4] [5] | |
| Spektrales noise (10,000 Hz) | 50 µV/√Hz | [4] [5] | |
| Wide band noise (1... 10,000 Hz) | 3.5 mV | [4] [5] | |
| Backup | 0.0416666666666667 | ||
| Physical properties | |||
| Connection (ICP® sensor input) | Connection terminals | ||
| Connection (output) | Connection terminals | ||
| Connection (DC power supply) | Connection terminals | ||
| Assembly | On top-hat rail | ||
| Size - height | 3.1 in | 78.7 mm | |
| Size - width | 0.97 in | 24.6 mm | |
| Size - depth | 3.3 in | 83.8 mm | |
| Mass | 0.194 lb | 0.088 kg | |
| Notes | |||
| [1] | Adjustable via internal jumper | ||
| [2] | 1 Hz = cpm 60 ("Cycles Per Minute": revolutions per minute) | ||
| [3] | The bias voltageof the connected sensor maximum 13 V should DC If at all, otherwise the positive measuring range is reduced or the sensor does not work. | ||
| [4] | Gain 100 | ||
| [5] | Typically | ||
| [6] | Gain 10 | ||
| [7] | Gain 1 | ||
| Additional informations | |||
| Input | ICP® sensor | ||
| Outputs | Real-time signal, Gain 1 x / 10 x / 100 x, Range of ±6 V | ||
| Usage purpose | ICP® sensor power supply |
PCB-682A02
