Digital ICP - USB Signal Conditioner
- Easily save and share data on-the-go
- Plug & play signal conditioning
- Makes high quality measurement more accessible
- Pocket-sized, USB powered, portable signal conditioning
- Analysis options from time domain to RMS to FFT and more
- Simplifies measurement chain without sacrificing quality
- No driver installation required
|
MODEL 485B39 SPECIFICATIONS |
|
|
Performance |
Specification |
|
Channel Count |
2 |
|
Voltage Range (Nominal) |
± 10 V pk [1] |
|
ADC Resolution |
24-bit[2] |
|
Frequency Range (± 5 %) |
0.8 Hz to 20.7 kHz |
|
Sample Rate |
48, 44.1, 32, 22.05, 16, 11.025, 8 kHz |
|
Antialiasing Lowpass Filter (-3 dB) at 48 kHz |
22.9 kHz[3] |
|
AC High Pass Filter (-3 dB) (48 kHz to 8 kHz) |
1 Hz to 0.5 Hz[4] |
|
Digital Output Interface |
USB Class 1 Audio |
|
Physical |
Specification |
|
Temperature Range (Operating) |
14 °F to +176 °F (-10 °C to +80 °C) |
|
Temperature Range (Storage) |
-40 °F to +176 °F (-40 °C to +80 °C) |
|
Excitation Voltage to Sensor (± 5 %) |
24 V DC |
|
Constant Current Excitation (± 5 %) |
4 mA |
|
DC Power (USB) |
< 500 mW (5 V at 100 mA) |
|
Settling Time |
1,5s |
|
Electrical Isolation (case) |
Grounded |
|
Data / Power Indicator |
Green LED |
|
Housing Material |
Stainless Steel |
|
Size (length x width x height) |
2.36″ x 1.5″ x 0.9″ (60 mm x 38 mm x 23 mm) |
|
Weight |
4.4 oz (125 grams) |
|
Sensor Inputs |
2 BNC jacks |
|
Digital Output |
11″ Integral Cable (28 cm Integral Cable) |
|
USB Connector |
Type A |
|
Optional Accessories |
|
|
MD821AM/A USB A to Lightning camera adaptor |
|
|
USB A to USB OTG adaptor |
|
|
Inline ICP® charge converter (422Exx Series) |
|
|
[1] ±8 V pk guaranteed |
|
|
[2] 16-bit selectable by software |
|
|
[3] Proportional to sample rate |
|
|
[4] Sample rate dependent (48 kHz to 8 kHz) |
PCB-485B39
