PCB-M1631-06C
basic data | |||
measuring range | 4.496 lb | 20 kN | [1] |
value (±10%) | 2 mV / V | [2] | |
linearity error | ≤0.15% FS | ||
hysteresis | ≤0.15% FS | ||
repeatability | ? 0.05 %RO | ||
Resonance frequency | 2.500 Hz | ||
creep error | ≤0.08% | ||
conditions | |||
Ü berlastlimit | 6,745 lb | 30 kN | |
maximum capacity < br(Seitlich einwirkende Kraft, FX oder FY) ) | 450 lb | 2,000Ω | [4] |
maximum capacity < br(Biegemoment, MX oder MY) | 1,124 in-lb | 127 Nm | [4] |
maximum capacity < br(Axiales Drehmoment, MZ) | 1,124 lb | 127 Nm | [4] |
Temperature range (operation) | 0 … 200 °F | 18 … 93 ° C | |
temperature range (offset) | 75 … 150 ° F | 21 … 65 ° C | |
temperature impact on the Output (max) | ±0, 002% of reading / ° F | ±0, 0036% of reading / ° C | [3] |
temperature effect on zero signal deviation (maximum) | ±0. 00?5 %FS/°F | /±0, 027% FS / ° C | [3] |
technical characteristics | |||
Bridge resistance | 350Ω | [2] | |
supply voltage (recommended) | 10 V DC | [5] | |
insulation resistance | > 5,000 M ? | ||
Zero signal deviation | ≤ 1% FS | ||
output polarity | positive when pull | ||
physical properties | |||
size -. Length | 2.50 in | 64 mm | [6] |
size - height | 3.50 in | 89 mm | |
size - width | 1.50 in | 38 mm | |
Weight | 2.85 lb | 1.3 g | |
Housing material | nickel plated steel | ||
sensor element | strain | ||
Aspect ratio at full load | 0.003 in | 0.05 mm | |
wiring | integrated cable, length 3 m | ||
cable outlet | Side | ||
notes | |||
[1] | FS = "Full Scale": full scale | ||
[2] | nominal | ||
[3] | over the compensated temperature range | ||
[4] | insulated load the load cell with the named power or with the designated moment < br(keine zus) additional loads) | ||
[5] | calibrated with 10 V DC supply voltage; Power supply with 5 … 20 V DC or V AC RMS possible | ||
[6] | details of the dimensions : see technical drawing |