PCB-M1630-06C
| basic data | |||
| measuring range | 225 lb | 1000 N | [1] |
| value (±10%) | 2 mV / V | [2] | |
| linearity error | ≤0.15% FS | ||
| hysteresis | ≤0.15% FS | ||
| repeatability | ? 0.05 %RO | ||
| Resonance frequency | 2.200 Hz | ||
| creep error | ≤0.08% | ||
| conditions | |||
| Ü berlastlimit | 337.5 lb | 1,500 N | |
| maximum capacity < br(Seitlich einwirkende Kraft, FX oder FY) ) | 22.5 lb | 100 Ω | [4] |
| maximum capacity < br(Biegemoment, MX oder MY) | 45.1 in-lb | 5,1 Nm | [4] |
| maximum capacity < br(Axiales Drehmoment, MZ) | 45.1 lb | 5.1 Nm | [4] |
| Temperature range (operation) | 0 … 200° F | 18 … 93 ° C | |
| temperature range (offset) | 75 … 150 ° F | 21 … 65 ° C | |
| temperature impact on the Output (max) | ±0, 002% of reading / ° F | ±0, 0036% of reading / ° C | [3] |
| temperature effect on zero signal deviation (maximum) | ±0. 00?5 %FS/°F | /±0, 027% FS / ° C | [3] |
| technical characteristics | |||
| Bridge resistance | 350Ω | [2] | |
| supply voltage (recommended) | 10 V DC | [5] | |
| insulation resistance | > 5,000 M ? | ||
| Zero signal deviation | ≤ 1% FS | ||
| output polarity | positive when pull | ||
| physical properties | |||
| size -. Length | 2.00 in | 51 mm | [6] |
| size - height | 2.50 in | 64 mm | |
| size - width | 0.625 in | 16 mm | |
| Weight | 0.23 lb | 104 g | |
| housing material | aluminum | ||
| sensor element | strain | ||
| Stretch at full load | 0.0025 in | 0.05 mm | |
| wiring | integrated cable, length 3 m | ||
| Cable exit | side | ||
| Notes | |||
| [1] | FS = "Full Scale": full scale | ||
| [2] | nominal | ||
| [3] | over the compensated temperature range | ||
| [4] | in isolated Load the load cell with the named power or with the designated moment < br(keine zusätzlichen Belastungen) | ||
| [5] | calibrated with 10 V DC Supply voltage; Power supply with 5 … 20 V DC or V AC RMS possible | ||
| [6] | details of the dimensions : see technical drawing |
PCB-M1630-06C
