PCB-M1630-03C
    zoom_out_map

      PCB-M1630-03C

    • S type load cell,
    • Measuring range 200 g,
    • Nominal 2 mV / V,
    • Integrated cable, length 3 m,
      ending on open ends
    •  

      basic data
      measuring range45 lb200N [1]
       
      value (±10%)2 mV / V [2]
       
      linearity error≤0.15% FS  
       
      hysteresis≤0.15% FS  
       
      repeatability? 0.05 %RO  
       
      Resonance frequency1500 Hz  
       
      creep error≤0.08%  
      conditions
      Ü berlastlimit67.5 lb300 N 
       
      maximum capacity < br(Seitlich einwirkende Kraft, FX oder FY) )4.5 lb20 N[4]
       
      maximum capacity < br(Biegemoment, MX oder MY)10 in-lb1 Nm[4]
       
      maximum capacity < br(Axiales Drehmoment, MZ)10 in-lb1 Nm[4]
       
      Temperature range (operation)0 …200 °F18 … 93 ° C 
       
      temperature range (offset)75 … 150 ° F21 … 65 ° C 
       
      influence of temperature on the output signal (maximum )±0, 002% of reading / ° F±0, 0036% of reading / ° C[3]
       
      temperature influence on (max) zero signal deviation±0. 00?5 %FS/°F±0. 027% FS / ° C[3]
      technical characteristics
      Bridge resistance350Ω [2]
       
      supply voltage (recommended)10 V DC [5]
       
      insulation resistance> 5,000 M ?  
       
      zero signal deviation≤ 1% FS  
       
      Output polarityPositive for traction  
      Physical properties
      size - length2.00 in51 mm[6]
       
      size - height2.50 in64 mm 
       
      Size - width0.625 in16 mm 
       
      weight0.23 lb104 g 
       
      Housing materialaluminum  
       
      sensor elementstrain  
       
      stretch at Full load0.002 in0.05 mm 
       
      wiringintegrated cable, length 3 m  
       
      cable outletlateral  
      Notes
      [1]FS = "Full Scale": full scale  
       
      [2]nominal  
       
      [3]Over the compensated temperature range  
       
      [4]insulated load the load cell with the named power or with the designated moment < br(keine zusätzlichen Belastungen)  
       
      [5 ]Calibrated with 10 V DC supply voltage; Power supply with 5 … 20 V DC or V AC RMS possible  
       
      [6]details of the dimensions : see technical drawing  
      PCB-M1630-03C

      Specific References

      Download

      M1630-03C_drawing.pdf

      Technical drawing

      Download (396.48k)

      M1630-03C_manual.pdf

      Operating instructions

      Download (1.42M)

      M1630-03C_specs.pdf

      Technical data sheet

      Download (72.06k)